It is currently Sun May 03, 2026 9:00 am

View unanswered posts | View active topics


Board index » Tech and Fab » Transmissions

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 
  Print view Previous topic | Next topic 
Author Message
wildcatoffroad9606
 Post subject: Popping out of first
PostPosted: Sat Jan 01, 2011 5:49 pm 
Offline
User avatar

Joined: Wed Jun 11, 2008 7:35 pm
Posts: 274
Location: west kentucky
I tore out reverse Thanksgiving weekend. I got that fixed, but now it keeps coming out of first gear. It sure made our trip today a short one. Any ideas?
Top
 Profile  
 
bmoore
 Post subject: Re: Popping out of first
PostPosted: Sun Jan 02, 2011 2:33 am 
Offline
WB Contributor

Joined: Mon Dec 29, 2008 9:52 pm
Posts: 1342
Location: Mckenzie, TN
dont you run a 3 rib??? if you do just pick up another, they are pretty cheap :wink:

_________________
lets just ride
Top
 Profile  
 
MickeyMouse
 Post subject: Re: Popping out of first
PostPosted: Sun Jan 02, 2011 1:51 pm 
Offline
WoodsBuggy Addict
User avatar

Joined: Tue Jan 08, 2008 8:53 pm
Posts: 3056
Location: Atlanta, GA
wildcatoffroad9606 wrote:
I tore out reverse Thanksgiving weekend. I got that fixed, but now it keeps coming out of first gear. It sure made our trip today a short one. Any ideas?


Start in 2nd gear... :twisted: :twisted:

_________________
Woodsbuggy forum is now on the Tapatalk Mobile app... (iPhone, iPad and Android devices)
Top
 Profile  
 
chris38375
 Post subject: Re: Popping out of first
PostPosted: Sun Jan 02, 2011 3:12 pm 
Offline
WB Videographer
User avatar

Joined: Tue Dec 25, 2007 12:40 pm
Posts: 1617
Location: selmer tn. pickwick tn.
could had not got the shifting forks adjusted right inside the tranny,did u put it in a jig to set up r,1st,2nd,3rd,and 4th,,if u did that it jus could be ur shifter not adjusted in the right place
Top
 Profile  
 
rail1914
 Post subject: Re: Popping out of first
PostPosted: Sun Jan 02, 2011 3:58 pm 
Offline
User avatar

Joined: Fri Apr 18, 2008 7:20 pm
Posts: 219
Location: indianapolis,in
time to switch to a side shift and all your prob will be gone for good
Top
 Profile  
 
chris38375
 Post subject: Re: Popping out of first
PostPosted: Sun Jan 02, 2011 5:21 pm 
Offline
WB Videographer
User avatar

Joined: Tue Dec 25, 2007 12:40 pm
Posts: 1617
Location: selmer tn. pickwick tn.
rail1914 wrote:
time to switch to a side shift and all your prob will be gone for good

u can break anything
Top
 Profile  
 
RaceBugg1098
 Post subject: Re: Popping out of first
PostPosted: Mon Jan 03, 2011 3:48 pm 
Offline
BOTM Winner
User avatar

Joined: Wed Nov 07, 2007 2:07 pm
Posts: 1599
Location: Petersburg, Ky
chris38375 wrote:
could had not got the shifting forks adjusted right inside the tranny,did u put it in a jig to set up r,1st,2nd,3rd,and 4th,,if u did that it jus could be ur shifter not adjusted in the right place

yep, sounds like time to re-jig!

_________________
Maybe you should chug on over to mamby pamby land....
Top
 Profile  
 
rail1914
 Post subject: Re: Popping out of first
PostPosted: Mon Jan 03, 2011 5:27 pm 
Offline
User avatar

Joined: Fri Apr 18, 2008 7:20 pm
Posts: 219
Location: indianapolis,in
chris38375 wrote:
rail1914 wrote:
time to switch to a side shift and all your prob will be gone for good

u can break anything

very true :lol:
Top
 Profile  
 
jon williams
 Post subject: Re: Popping out of first
PostPosted: Mon Jan 03, 2011 5:34 pm 
Offline
User avatar

Joined: Sun Jan 24, 2010 2:11 pm
Posts: 306
Location: Tuscaloosa Alabama Roll Tide!
You can drill a hole in the side of the case at the shift forks. Then you can adjust the depth of first gear. I think eric debord's site explains where to drill the hole. when you are done just install a rubber freeze plug in the hole. Or tear it out and re jig it.

_________________
when in doubt use the skinny pedal!
Top
 Profile  
 
wildcatoffroad9606
 Post subject: Re: Popping out of first
PostPosted: Mon Jan 03, 2011 6:45 pm 
Offline
User avatar

Joined: Wed Jun 11, 2008 7:35 pm
Posts: 274
Location: west kentucky
When we tore it down the pinion bearing had came apart. It is a 3 rib, but they are getting harder to find local, and the money to buy one is getting harder too.
Top
 Profile  
 
gasman
 Post subject: Re: Popping out of first
PostPosted: Tue Jan 04, 2011 10:25 pm 
Offline
WoodsBuggy Addict
User avatar

Joined: Fri Nov 14, 2008 9:45 pm
Posts: 2226
Location: Boone County West (BY GOD) Virginia
If you never set it back right then tear it down and fix it.cheaper than tearing it up.check out Eric debord site.there is a link to it on the home page.you may want to try and go that route.or put a bungee cord on it :shock: lol.Chad :mrgreen:

_________________
NOW GAS IT!!!!!
Top
 Profile  
 
passat2800
 Post subject: Re: Popping out of first
PostPosted: Wed Jan 05, 2011 12:01 am 
Offline
WB Contributor

Joined: Mon Aug 10, 2009 11:33 am
Posts: 1049
Location: Birmingham Alabama
:idea:
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 

Board index » Tech and Fab » Transmissions

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 0 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group