you gotta run buckshots not them sorry v's

_________________


I DO NOT FREE BASE COCAINE

Jesse after all the work I did cuttin those v treads i atleast got to try em. I cut almosst 25 pounds off each tire. I filled one 5 gallon bucket up and still have a pile about 3ft around 6 inches deep left. I cut every other set of lugs out and cut the side walls down about 3 inches. They are soft as 4 wheeler tire, they should work fairly well.

haha ok well maybe with all that time and work put into them i would use them as well

_________________


I DO NOT FREE BASE COCAINE

Im going to kevin thomas's house saturday to finish the chassis up. tree bars, engine cage and loops for carbs. It should be complete and painted by sunday. I will have pics up soon.

The chassis is done. All I lack is fabbing the shock mounts on the rear. Im waiting on the mounts to get here. I will post some new pics soon.

i look forward to seeing some pics!!!

_________________
lets just ride

_________________
If your clutch ain't slippin,, you probably got it adjusted right!!!!!

very very nice kevin!!! alabama cookie killer

_________________
lets just ride

Looks great !

Bmoore I think you may have something there. Everyone keeps coming up with names for it but I think you got the best one yet. Ive got to weld my lower shock mounts on in the rear and seat belt tabs and its done. Next I have to freshen the motor and raise the compression and build the tranny. I figure about 3 weeks it will be ready for action.

_________________
lets just ride

id drive the hell out of it.. looks amazing

_________________
If your not God, then don't judge me

fondren i hate to tute your horn but that thing looks bad but I know little brannon showed you how to do all that

Ive done a buggy like he did and it works, I just did it with heat from a torch that way i could spread both sides equal. It looks bad ass whether or not it works good I dont know. We will find out shortly.

Good looking buggy

That does look sharp, nice work.

_________________
Of all the things I've lost, I miss my mind the most.
M
A
G
A

Kevin i wouldn't spread those supports so far apart in ur tree bars. Ive found out that if u have more than 1 foot between them they will bend all to hell. jm.02 Looks really good

_________________
"It is easy to be brave from a safe distance."

Their really not that far apart. I think their like 14 inches center to center and 120 wall. Im gunna try it if they bent i can porta power them out and add braceing. thanks for the input though.

_________________
Just Stand On It!!!!

Chris

i like it. sharp buggy

_________________
"It is easy to be brave from a safe distance."

I got the shocks mounted and gas tank in tonight. Gettin close. Me and Bebo is goin to chucks next weekend to build the trans. Im hopeing to get the motor freshened up next week.

I'm anxious to look at those v treads u cut up. I think I may have to be a copy cat and cut mine the same way. the tread on my dicos is to close together. they will spin out easy. since u cut out the lugs and spread out the tread i bet those things will bite hard. You done an awesome job on the buggy, and it didn't really take you all that long. Will you be ready for the first hill climb compitition?

_________________
when in doubt use the skinny pedal!

Yea it didnt take me long because our work got slow and thats all i had to do. I had forgot what a pain in the butt it was to build a buggy. Bebos was the last one I built. It should be running in a couple of weeks and it will be at the 1st hillclimb I just dont know who will be driveing it me or Bebo.

where is the 1st hill climb

I dont know yet, they are still workin on the schedule.