i picked up a frame last week and i got it painted today, im going to start putting it together tomorrow so ill post pics as soon as i can
im so excited

Congrats on the new frame...

Wow.. you already got it painted.. Have you already finished the fabrication? if not, you will probably need some touch up paint before you are finished.

Keep the pics coming

_________________
Woodsbuggy forum is now on the Tapatalk Mobile app... (iPhone, iPad and Android devices)

it was a used frame and it already had every thing in it, i dont need to do any welding on, it took me a day to get it ready to paint it i took it down to bare metal before i painted it ill have it done by sunday evening

who's frame was it if you dont mind me asking

_________________
lets just ride

its the one darrel had at the thanks giving ride, the on with deer horns on the front of it, cant wait to get er done

congrats! thats a great start! look forward to seeing your progress

_________________
lets just ride

thanks hopefully to be riding it sunday night

Wheres the pics?

ive got the pics on the camra but i just havent had time to download them to the computer yet, but ill get them put on as soon as i can

lets see 'em!

_________________
Maybe you should chug on over to mamby pamby land....

well im almost done with it and ill post pics of it when i get done and i figure out how to do that
and i set my torsion for it to be soft but its not sittin on the stops and that is taking away from my ground clearance, how do i set the torsion to be soft and still have ground clearance, on my 2 seater i had 17 to 18 inches in the back and on my 1 seater i only have 13 or 14
how much ground clearence do most of the 1 seaters have??

I like mine yo be about 1/4 from setting on the stops if u want it on the stops than it going to be stiff.I also run adjustable shocks so i can build them to do what i need them to.

_________________
"It is easy to be brave from a safe distance."

Some people notch the spring plates to get a little or cut the stops off and run limit straps. And it depends on what cv's you are running on how much angle you can put on them.

mine is about 1/4 off the stops and im running bus cv joints, i might hace all the ground clearence i can but it dont seem like much

How much farther can you go up before cvs bind?

Your right Terry i for got i did notch my spring plates there chrome molly spring plates they came wider then factory but i still notch them a little more than stock plates.

_________________
"It is easy to be brave from a safe distance."

idk im 1/4 inch off the stopps right now

Probably gona have to notch like they said but watch for cv bind and you dont want it to stiff.

how do u knotch it? i dont get what ur all sayin

hope this helps its all i could find my puter wont let me load pics.
http://www.chircoestore.com/catalog/smf ... pic=5434.0


[quote=jessielee"]how do u knotch it? i dont get what ur all sayin [/quote]

ok thanks that helps alot

You aint gonna get anymore than 13" without breakin joints if you run bus joints on that buggy.
Remember when I told you that you'd HAVE to get 930's to run a frame with the torsion/tranny set in it like ours?? I wasn't bs'in you.

oh yea i forgot about u tellin me that, ill just have to run what i got right now, after i get a frontend ill be out of money for a wile gotta get a job
did u all have a good ride this weekend larry, hope u all got alot of vids, i cant wait to get to ride

ive been tryin to get u a front end but he dont know forsure if he wants to let go of it yet

_________________
lets just ride

ok thanks bmoore ive been looking for some and found a few but they was asking out the ass for them