changed up some stuff on my buggy over the last few weeks..... thought id post some pics while it was clean
http://i755.photobucket.com/albums/xx19 ... 1643_1.jpg
http://i755.photobucket.com/albums/xx19 ... 071643.jpg
http://i755.photobucket.com/albums/xx19 ... G00283.jpg

_________________
If your not God, then don't judge me

like ur flag on top.....

_________________
"It is easy to be brave from a safe distance."

thanks

_________________
If your not God, then don't judge me

Was checking out your frame.does all these invader frames have no straight down supports from the top rail down to the bottom rail,like under the windshield and between your diagonal support bars.I noticed this also on bmoores buggy he got for his wife.looks to me like the front would twist or flex more causing it to break where the top rail bends down to the front beam.I don't know was just wondering cause on the older explorer frames where they had straight rails on the bottom and bend down on the top to the front beam use to break bad at that bend.maybe they were to stiff and did not flex enough.hmmmm,now my brain is thinking.Chad

_________________
NOW GAS IT!!!!!

Ive rolled it over a couple of times, nothing major tho, and it hasnt bent or anything. i have those little braces on that slanted bar and inside my halo has an xbrace in it and it seems to be doin pretty good. The top bars are thick walled pipe also, so i guess that is helpin with bends.

_________________
If your not God, then don't judge me

i have the same concerns chad! i started adding bars to the wifes this weekend and down bars are among first on the list

and i also like the flag bobby

_________________
lets just ride