just like it says where is everybody buying the reinforced push loc oil lines and fittings at?

_________________
Just Stand On It!!!!

Chris

I get them from Parker,
http://www.parker.com/portal/site/PARKE ... 08a8c0RCRD
I couldnt find it on their on their website. If you dont have any luck by calling them, pm me. They have a retail store near me.

thanks larry

and just to make sure #8 AN I.D. is the same as 1/2" I.D. that everybody uses for the oil lines correct?

_________________
Just Stand On It!!!!

Chris

yep
BTW, it was nice to meet ya in person last weekend!

I was told AN sizes represent the numerator of a fraction with a denominator of 16.
IE:
-an2 =2/16= 1/8th inch line
-an4= 4/16= 1/4 inch line
-an8= 8/16= 1/2 inch line
etc etc

thanks again larry and nice meeting yall

_________________
Just Stand On It!!!!

Chris

i checked and there is a parker store about 30 min. away from my house, so what do i need to ask for?

_________________
Just Stand On It!!!!

Chris

im gonna check with the parker store on availability and price but just making sure im on the right track this is what i need correct?

http://www.jegs.com/i/JEGS/555/102022/10002/-1

or this

http://www.summitracing.com/parts/FRA-862008/

_________________
Just Stand On It!!!!

Chris

Parker store is on mcintire lane. Decatur rubber and industrial ubber should also have them. All of those places will also custom make just about any line you need. I have hookups at decatur and industrial rubber.

I get my supplies from Jegs. They have full range of products in their inventory. You may want to check it out. Or better yet you call them and inquire, just dial 1-800-345-4545.

_________________
My online plumbing