I'm sure this is a pretty easy one, but I have a 3 rib in a car irs. I also have a lot of spares and just want to make sure I have a set of spare axles. Is it a bus cv on cv end of axle then a car axle and car cv on arm end. And how do I measure to see what is a car and what is a bus cv. Thanks in advance, oh and I could be totally off on all this just let me know, thanks

yes you are rite about which end your cv's go on,if you put a car beside a bus cv its pretty visible that the bus is larger

_________________
lets just ride

Axles are 15 and 5/8" long. Sway Away part # 2015.

wow where would i be without the internet. Thanks a lot guys

IMHO 15-5/8" are a bit short when the torsion is up on the stops.
They are constantly pulling on the cages.
I'd rather have the 16-1/4" with long splines for that application.

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page

Thanks Gary, I never installed any before. I only knew Sway Away had that size listed. Thats good to know. Purchacing two sets of axles and replacing broken CVs is is an expensive lesson.