k so im gettin pretty close to havin a rollin buggy. i need axles. the ones that came on it are for a sedan tranny.i now have a 3 rib tranny. what are my options, just gettin cv's or just new axles. i want to do it right the first tiem. i need to know what to get, size, and whatever else i would need lol.

All buggy shops should stock the long spline axles you need. They are called bus to sedan axles. Also get type 2 stub conversions if you didnt already. I blew 12 car CV's in 3 rides. Youll thank me later.

_________________

Thats if you are running stock boxed arms only BTW.

_________________

if ur running stock arms i have the axles u need theres 3 of them 100 shipped there listed on here under 15 5/8 axle in parts for sale there swayaway

i think im running stock arms, pretty new to this so i dont know as much as i like... and buggy junky, il prob grab them from you, just want to make sure thats what i need. i added the pic of my arms to see if they wre stock..

i dont see the pic

_________________
lets just ride

I,ve got the stub axles you need to use bus cvs at your control arms. They are listed in parts for sale. Got cvs and boots too.

_________________
Turbocharged Ecotec,vanogon midshift,Berrien WoodsBuggy wagon.

what all do i need for the axles. waht are stubs?> i know i need cv's.. buggy junky do you have pics, and do yours come with cv's

The stub axles go in the trailing arms & the outer CV's bolt to em. Simple thing to swap out.

_________________

i have pics of axles just pm me ur email and ill send them they do not have any cvs

So I could use the existing stubs from my existing axles

A (stub axle) is all one part. Its a solid piece that connects the CV joint to the drive splines in the rotors. If you know somebody with the machines they can grind or turn the lip down & redrill the bus CV pattern on em. Thing stubs work but are tuff to find. Buggyjunkies are already redrilled for bus if you dont know a machinist.

_________________

So if I bought the stubs, cv's and axles, that's all I'll need?

Dont forget bus boots but yep, thats it. Use your bearings & CV bolts. You will need a nut whacker to swap em too. 8 bucks

_________________

Not a hi-jack, what is a nut whacker? Is that like a hammer wrench?

_________________
[url=http://www.TickerFactory.com/]

[/url]

http://www.appletreeauto.com/hd-36mm-rear-axle-nut-tool-c-4-p-2-pr-835.html

NUT WHACKER
When you need to get a nut off beat it with this.....

_________________

Hey, I know her.

_________________
A good friend will bail you out of jail. A best friend will be sitting next to you saying: "Damn that was fun!"



http://www.youtube.com/watch?v=A5wGMaUMXUQ

i was wondering what that was also. nut whacker

_________________
lets just ride

You missed my edit......Boy I could really get going on this one.

_________________

Hmmmmm, I always just used a socket and a 3/4 impact

_________________
[url=http://www.TickerFactory.com/]

[/url]

Nut Whacker
If this pushes it Ill remove it.

_________________

This is old school. I smack it with a sledge to tighten em up. Even my 3/4 drive cant equal this puppy.

_________________

ya we use those on big pipe flange bolts, like 20" and up pipe.

_________________
[url=http://www.TickerFactory.com/]

[/url]

Stub axles drilled for bus or bug cvs and stock bus cvs with boots and allen head bolts. These are stock bus axles and too long for your stock arms but you can toss thim in the corner.

_________________
Turbocharged Ecotec,vanogon midshift,Berrien WoodsBuggy wagon.

sorry about the highjacking but couldnt find this ad for these axles. how much for the bus to bus cv's and axles?

_________________
lets just ride