It is currently Sun May 03, 2026 11:38 pm

View unanswered posts | View active topics


Board index » Buy Sell Trade » Parts, Parts & More Parts

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
turboblue
 Post subject: Heads and carbs
PostPosted: Wed Dec 23, 2009 2:41 pm 
Offline
WoodsBuggy Addict
User avatar

Joined: Mon Feb 19, 2007 2:23 pm
Posts: 2039
Location: Central Indiana
These are welded ported VW heads, matched intakes, dual 44 IDF carbs, filters and crossbar linkage.
One plug hole has been inserted.
Came off a 2332cc woods buggy engine.
Customer is now going turbo.
Pretty dirty but overall in decent shape.
All this belongs to the turbo customer.

$750 firm for the package.

Image

Image

Image

Image

Image

Image

Image

Image

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page
Top
 Profile  
 
ironhorse
 Post subject: Re: Heads and carbs
PostPosted: Fri Jan 01, 2010 5:16 pm 
Offline

Joined: Tue Sep 15, 2009 4:19 pm
Posts: 137
Location: hwy. 26 columbiana al
are those the same size in the heads it doesnt look llike it
Top
 Profile  
 
turboblue
 Post subject: Re: Heads and carbs
PostPosted: Sat Jan 02, 2010 11:14 am 
Offline
WoodsBuggy Addict
User avatar

Joined: Mon Feb 19, 2007 2:23 pm
Posts: 2039
Location: Central Indiana
ironhorse wrote:
are those the same size in the heads it doesnt look llike it


I dunno, let me check.
These belong to a customer.
I was just trying to help him sell them.

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page
Top
 Profile  
 
hauser2169
 Post subject: Re: Heads and carbs
PostPosted: Thu Jan 14, 2010 3:13 pm 
Offline

Joined: Mon Sep 21, 2009 2:28 pm
Posts: 101
Location: cincinnati ohio
how much for carbs
Top
 Profile  
 
gasman
 Post subject: Re: Heads and carbs
PostPosted: Thu Jan 14, 2010 3:47 pm 
Offline
WoodsBuggy Addict
User avatar

Joined: Fri Nov 14, 2008 9:45 pm
Posts: 2226
Location: Boone County West (BY GOD) Virginia
it does look like two diffrent sizes.might just be one of those pictures,but looks diffrent.how much have these been run,do you know?

_________________
NOW GAS IT!!!!!
Top
 Profile  
 
dunebuggynut
 Post subject: Re: Heads and carbs
PostPosted: Thu Feb 04, 2010 2:34 am 
Offline
User avatar

Joined: Wed Feb 11, 2009 1:54 am
Posts: 690
Location: Girard, Ohio
Gary, Ive been looking at these to run on a 2180 I got cheap. I can get thick wall cylinders & cut the bottom to 92mm since the heads are 94mm. Question is that upper head looks like it has 40x35.5 valves & the lower one looks to have 42x37's in it. Am I wrong???

_________________
Image
Top
 Profile  
 
giveitagallon
 Post subject: Re: Heads and carbs
PostPosted: Thu Feb 04, 2010 7:35 am 
Offline
WoodsBuggy Addict
User avatar

Joined: Tue Sep 08, 2009 4:43 pm
Posts: 1847
Location: rittman,ohio ----------- wellsville, water cooled chapter
dunebuggynut wrote:
Gary, Ive been looking at these to run on a 2180 I got cheap. I can get thick wall cylinders & cut the bottom to 92mm since the heads are 94mm. Question is that upper head looks like it has 40x35.5 valves & the lower one looks to have 42x37's in it. Am I wrong???
did you get the 2180 from a guy in east liverpool ?

_________________
Theirs no replacement for displacement !
Top
 Profile  
 
dunebuggynut
 Post subject: Re: Heads and carbs
PostPosted: Thu Feb 04, 2010 9:38 am 
Offline
User avatar

Joined: Wed Feb 11, 2009 1:54 am
Posts: 690
Location: Girard, Ohio
giveitagallon wrote:
did you get the 2180 from a guy in east liverpool ?


Yea, thats the one. Its a newer mag case. The bottom end is tight & was recently freshened up. The cylinders are junk. They were honed & ringed once so Im gonna replace em. Heads are nothing special & were probably restricting it 35 or more HP. The DIS IX ignition is new & I may try it. I have another one thats new for a spare. The dual carbs will go on something else. I think they were holding it back as well.

_________________
Image
Top
 Profile  
 
turbo2332
 Post subject: Re: Heads and carbs
PostPosted: Thu Feb 04, 2010 4:09 pm 
Offline
User avatar

Joined: Thu Dec 10, 2009 4:35 pm
Posts: 24
Location: Anderson, IN
hey guys these are my heads and carbs. i ran this set-up for over three years. never a problem. yes we just found out that for some reason the valves in one head are different? these came off a very healthy 2332 and never had an issue with them.
Top
 Profile  
 
jackson.ryan29
 Post subject: Re: Heads and carbs
PostPosted: Tue Feb 16, 2010 8:25 am 
Offline
User avatar

Joined: Tue Nov 10, 2009 5:18 pm
Posts: 231
Location: toronto ohio
do u still have the heads and how much for them

_________________
sit down!!!!! hold on!!!! and scream!! cuz we're going
1915 counter cRank, mofoco 042 maule 94's vz15 and 5 rib built to the max!!!
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Board index » Buy Sell Trade » Parts, Parts & More Parts

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 0 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group