ok so i just got some mocked up raised 3" combo spindles in a trade and what nut do i need to use to hold the brakes on? would a clamp aluminum nut work? i need help so i can put my brakes on!!!!

If your asking what nut holds the wheel hub on its a standard VW size and thread on all the Combos I have seen and yes the clamping style Aluminum nut will work. You will still need a steel thrust washer behind it.

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!

yes that is what im asking...i just got my brakes in from Gear One...and they sent the whole set up but i just need the nut and bolt that goes to hold the hub onto the spindle...thanks fo your help! what would you recomend...? is aluminum ok or should i go stronger? its not much of a price difference when it comes to nuts for a spindle...

I use the clamp on Aluminum. I dont know what bolt you are refering to.

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!

you answered my question and the bolt that i was talking about is the treaded section of the spindle shaft....(i dont know the tech. names of the parts)

This is my first build so im new here