I’m wondering if anyone sells just the spindle stub for a ball joint. I found some combo stubs but not sure on the ball joint stub. I don’t want to cut up a good ball joint spindle if I can get the stub cheap.

Thanks, Brad

I have stock type link pin spindle stubs and I have the big 'combo' spindle stubs as far as I know they don't make a ball joint spindle. You could always make your own ball joint stubs.

_________________
Of all the things I've lost, I miss my mind the most.
M
A
G
A

Look at Empi part # 16-9914 and see if it can be something you can modify and use .
http://www.empius.com/2009_catalog/images/190.jpg

tim at southern buggys ,,15.00 a peice

Drews has them $40/pair.

_________________
A broken clock is right two times a day.

What we use on a K/P. Cut the K/P off use the B/J.


Can not beat the price.

thanks guys thats what I need.

afterburnt can I use you’re expertise and shop to do my spindle repair? Once I get the new spindle.

ya, your more than welcome, just give me a call, and let me know when you want to come over. I'll pm you my phone number.
dave

hey brad, how did that spindle work out? i was kind of curious if you put it on yet, and if that weld got in the way of the seal.
dave

The front end is complete. The weld was just touching in one spot so I ground it down a little. I think the upper control arm is still bent because I have major camber that can’t be adjusted. I don’t have time to fix it before this weekend so I am going to run it.

Thanks again for the help Dave

You going to make it this weekend? I should be there sometime Saturday morning.