I bought a drag fast shifter and when i install it into my shift rod it only goes into the socket say 1/4 inch if that, is there anyway to make the ball on the bottom of this shifter longer i went out tonight and drilled new holes in my shifter box to raise the bushing up so i could raise the rod up to have a better fit do you all think 1/4 is enough down in the socket or should i try to raise it up more or extend the ball on the shifter or just leave it the hell alone cause i was getting all my gears and reverse i just dont want it to come loose at 3 am in the middle of nowhere thanks again

It looks like they make 2 different styles. I had a stock shifter that was too short but I don’t know what it came out of. You might have to send it back and get the longer one. Might want to try to contact scat and ask them.

http://www.scatvw.com





If you've got questions about VW Performance

Scat has answers!


Ask our highly skilled Sales Staff anything
you need to know about our VW Performance Parts and Accessories.

Drop us a line at VWtech@ScatEnterprises.com