I'm looking at the saco power steering pulley, but need a type 3 crank bolt. I cant seem to find one. My next option is to just get the howe pulley / bolt combo. Any Ideas on the t3 crank bolt?

_________________
A broken clock is right two times a day.

Try this guy. He has the pulleys listed and says he has other type3 parts

http://www.thesamba.com/vw/classifieds/ ... ?id=333405

I think plumberbill has the entire billet Howe setup minus the pump.

Thanks Hillaholic, I sent him an email. Just trying to save a few bucks where I can. The saco pulley is much cheaper than the howe pulley but the saco requires a t-3 bolt.

_________________
A broken clock is right two times a day.

I have a brand new Saco Pully that I did not use if your Interested for 35 bucks shipped. When I did my setup I used a different pully and made an adapter that required a longer bolt than a T3. I welded a metric bolt to the end of a standard crank pully bolt to get the length I needed.The bolt I ued was about the same length of a T3 and I may have an extra. Call me.
Steve
216-695-0733

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!