Here is a video of my first rollover and man it really puckered me up!! I am glad that I did not get hurt and it did not do anything to the buggy at all and enjoy watching me trying to climb Debord Hill at the Cold Spot!! Sorry that it took so long to put it on here, but here it is!!

http://www.youtube.com/watch?v=a7nvR-iXKH0

_________________
"Loud pipes saves lives"

You missed several good chances to roll before you finally did it. Nice vid!

_________________
Aut Viam Invenium Aut Faciam!

Good video Chad! Now you got the 1st one out of the way! Can't wait to go back to the cold spot.Keep me posted.

_________________
IF YOU CAN'T MAKE IT IN A LITTLE BUGGY,IT CAN'T BE CLIMBED

i hate how a video makes a hill look little

Crap,,,what are we thinking,,,Oh yea,,,lovin it

_________________
If your clutch ain't slippin,, you probably got it adjusted right!!!!!

Chad u do a cool roll over ,they ain't to many can roll them over and jack them up in a tree all at the same time. cool had a blast when the old knee heal up we try to come up and let pipedope try his new one out,

_________________
If it feels good, hold it to the floor and pour it to it!
http://www.dandkoff-roadpark.com/FORSALE.html

third times a charm. that's the one that got you.glad u didn't get hurt that's the main thing but it did look pretty cool.

_________________
NOW GAS IT!!!!!

SWEET!!! Great to meet ya at D&K last weekend.

_________________
Bryan

Thanks guys, I am ready to go back to the Cold Spot anytime now until I broke my CV and stripped an axle today I am going to order a new set of SAW axles and some race-prepped cages for the new CV's, one of the new CV's exploded on me today and all I did was clutched it a little bit and there she went and it ruined my axle

_________________
"Loud pipes saves lives"

DId you have EMPI 930 axles? Been hearing of several of them strippin out here lately.

10-4 on the EMPI's, They are JUNK!!! this is the second one I done lately. I am gonna get new SAW axles now

_________________
"Loud pipes saves lives"

I got mine from Dans Performance,,,they are tough. Not sure what brand they are though.

_________________
If your clutch ain't slippin,, you probably got it adjusted right!!!!!

Not sure of my brand either, they came with lobro 930 cv kit. Keepin my fingers crossed.

Glad you did not get hurt. Did you drive the rail off of the tree? Thats a good way to see if all your floor nuts and bolts are tight. Empi and LR axles and torsion bars seem brittle and like to breakoff splines. I run Lobro CVs and Sway Away axles. A couple of places sell race prepped CVs.

Yes, I backed it right off the tree and looked at the rail and it did not do anything to it at all and all of the bolts were still holding the floorpan in, I ordered some new race-prepped cages for the CV's, they are 4340 chromoly ones already polished to run the CV's at 28 degrees. The CV cage exploded and when I took it apart, the pieces of it fell out and the star was still in one piece, but could not get it off of the axle because of the stripped splines in it, I can do some filing on the axle until I can get it to slide off of it.

_________________
"Loud pipes saves lives"

I'm glad the floor was tight. A Fred Flinstone rail could get scary. When I bought my rear arms from Woods Wheel Works he had me set the maximum axle angles 2 degrees less in each direction to compensate for any future damage that could increase the angle. After 2200 miles the cvs still look like new. I do keep a spare cage and ball set in the rails tool box.

That sucks about your axle, Chad.
You put on a good show for us all at the cold spot that day! It's a blast ridin' with ya. I got a picture on my phone of your buggy sitting on that tree like that. I got the video on my phone too. It's from the bottom though, so ya cant see much about it.

-Dakotah

_________________

-Dakotah/koko
keep on keepin' on!!