setting up my new single seat rear end. my old buggy i put one washer on one side and one on the other side of my trailing arm but this one looks like the wheels are facing out alittle any idea how to set it right? i guess i could redrill my spring plate single hole.

_________________
"It is easy to be brave from a safe distance."

thats the only way. changing those washers around will affect camber a bit, but to get your toe right you gotta line your holes up or redrill.....get busy!

_________________
2332cc Air Cooled Screaming Meanie. Predator Singleseat.

"Lets go get stupid"

the washers go on the same side..outside.

_________________
A broken clock is right two times a day.

all of us around here run 1 and 1

_________________
2332cc Air Cooled Screaming Meanie. Predator Singleseat.

"Lets go get stupid"

Then you all would be wrong. Putting a washer inbetween the arm and the pivot cup does nothing except make your axle shorter. It does nothing for caster, camber or toe. Both washers should be on the outside of the bushing exactly where Dr. Porche designed them to be at.

_________________
Of all the things I've lost, I miss my mind the most.
M
A
G
A

better look in your VW manual there fellows, no ones wrong, ou can put them 1 and 1 or 2 on both

_________________
2332cc Air Cooled Screaming Meanie. Predator Singleseat.

"Lets go get stupid"

The question was and is in regard to toe adjustment. Not trans/trailing arm centering. I know the book too Kyle.

_________________
Of all the things I've lost, I miss my mind the most.
M
A
G
A

I will admit, I have been schooled, I always thought its was 2 on the outside no matter what. I've never seen that diagram. (bogus homemade detail from eastern Ohio??) lol. Learn something new everyday.

_________________
A broken clock is right two times a day.

lol yea...i said long posts ago you had to redrill or realign the spring plates to the arms to get toe alignment....i was just showing the diagram cause it was said 1 and 1 was wrong smile mike

i was i could diagram that good andrew haha!

_________________
2332cc Air Cooled Screaming Meanie. Predator Singleseat.

"Lets go get stupid"

If you must re-drill the arms to get the toe correct I'm thinking the arm is bent. I would check that first and if your not measuring with a center line down the lenght of the buggy, probably not getting a accurate reading.

_________________
Of all the things I've lost, I miss my mind the most.
M
A
G
A