im tearing my buggy down and going to paint it with spray cans because im cheep lol but i dont know what color to do so im asking the people of woodsbuggy to help me pick one

_________________


I DO NOT FREE BASE COCAINE

black

_________________
Mike
Got Honda?

_________________
"YOU CAN MAKE THINGS HAPPEN, WATCH THINGS HAPPEN OR WONDER WHAT THE F$$K HAPPEND...WE'RE MAKING THINGS HAPPEN" The strong words of Captain Phil! Rest in peice!

You can always match black if you scratch it plus the sun doesn't fade it like it does most of the other rattle can colors. Mine has been rattle canned.

_________________
Aut Viam Invenium Aut Faciam!

Flat Camo...easy to touch up...just dont walk too far from your buggy in the woods.

_________________
Off-roading is NOT a spectator sport

If you can't buy it....Make it

You know, water and electricity dont mix (from a nurse at a hospital)

Two turtles don't make a rabbit

Neon Pink.. LOL

_________________
Bye Bye Buggy, I'll always miss you and never forget you, your going to a better place now.

Jeffy says sea foam green,
WTF
I like Henery Ford's idea, You can have any color you want as long as it's Black

_________________
Of all the things I've lost, I miss my mind the most.
M
A
G
A

for what youll spend on rattle cans you could buy a cheep cup gun and get some tractor pant with hardner it will turn out much better

_________________
small minds condemn anything they fail to understand!

I've seen a few painted with tractor paint that really turned out well. You really gotta thin that stuff down to spray it though, its as thick as "black mammy". Me and Dad sprayed a old Farmall Cub and he thinned his paint with kerosene. LOL! It actually turned out pretty good and shiny, stunk like the kerosene for most of the summer but it finally left.

I had $35 in Krylon Rust Tough rattle cans. Used to be that the dollar store stuff was pretty decent but not anymore, they must cut it with water cause it comes out runny and gloppy. The Krylon can actually throws a pretty decent pattern so you can cut in around things pretty well.

_________________
Aut Viam Invenium Aut Faciam!

krylon here is 5 bucks a can,foe 300 dollars u can pick a basic color and powder coat it and they will sand blast it for u

to rattle can it and mack it look good(sandpapper,primer,pant,and clare.=$200+lots of work

_________________
small minds condemn anything they fail to understand!

foam green bull thats baby blue

_________________
i dont always ride my buggy but when i do im glad it has a bad ass bow tie makin the horsepower

Jesus loves me, but everyone else thinks im an asshole.

Our Lady of Blessed Acceleration, don't fail us now!

True dat! Mine is a 50/50 paint job. It looks GOOOOD 50 feet away at 50mph! LOL!

Mine will be powder coated when I get everything the way that I want it.

_________________
Aut Viam Invenium Aut Faciam!

I have been into this for 8 years. I am a Krylon man. I seriously doubt that I have spent $300 on paint in that amount of time. An that is on both that I have had. I personnaly like the crappy paint job look on a woodsbuggy. Every year I touchup the bare spots. I am not a detail guy though.
As for color Black Black and more Black.

_________________
It's amazing what you can accomplish when you don't care who gets the credit.-
Harry S. Truman

i also like black my buggy has been 5 different colors in the past 5 years and i finally decided to stick with black when i get my new bee line next winter it will be powder coated black

heck its xmas red and green and put a star on top of it

_________________
i wana ride, i wana ride, i wana ride

im not much into black but i think i have decided to spend the money on freshening up my motor its about time to and getting a new trans i want it to look good but i would rather have it run great and look look bad

_________________


I DO NOT FREE BASE COCAINE

seems everyone likes black as long as its on a buggy.....doh! haha

_________________
2332cc Air Cooled Screaming Meanie. Predator Singleseat.

"Lets go get stupid"

I had a black one, I will never go back, because it is a pain in the a$$ to keep it cleaned-up. That's why I went for a brighter color, it shows the buggy works more and easier to keep clean.

_________________
"Loud pipes saves lives"

It will be well worth the $$$ for the powdercoat job, they will do everything for you and all you have to do is wait, and then put it together once you get the frame. I tried to touch up the black packrat that I had and it was a waste of time, everytime I touched it up, went riding, power-washed it, then it takes off more paint that I put on prior to it. Powdercoat is the way to go.

_________________
"Loud pipes saves lives"

I have a black buggy and it is hard to keep clean. You should paint it tan. That way so matter how dirty it gets it will always look clean.
Or there was the case of my buddy's derby car. He said "paint it however you want" so we painted it breast cancer pink. (the pink on the breast cancer ribbons.) My other buddy used a Wagner power sprayer. It really did a nice job, everything had a nice even coat of pink paint, the body, the wheels, the tires, the interior,.......

_________________
Why do I hate everyone?...................because they deserve it

IMHO Powder Coat is the only way to go. In the long run its holds up way better than any paint and for touch up get paint thats close.

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!