hey,

the tortion bars in my buggy are really stiff right now ( it was set up to jump in stadium racing) i have a set of stock bettle tortions


my qustion is would these do good for climbing ( single seat , 5 rib, 2276, 31 vtreads, if this helps)

and if so how do i go about swaping them


thanks
tanner

_________________
new to the buggy world so any help would be great

When I got my red Buggy it was way to stiff of a ride so I installed the stock 22 MM torsions and it made a hugh difference in the ride. Iliked it a lot better. I did have to index them once or twice. Keep in mind that I was running the shorter 21" setup and they are actually stiffer than the comparable 26" size. The only down size with the stock 22MM is they may break on you. Mine never did. Its pretty much a judgement call on your part. If your not jumping etc I would say go for it.

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!