Hey Guys. Lurked in here a few times, but never joined up. Pimp'n parts for a 1st post may be in poor taste, but hope its ok. Doing a complete remodel of my buggy. As such, I've got quite a few good parts for sale (no junk). Too much to list and post pics of, so if its ok, here's a link to the parts. The CNC rear hubs, the 3x3 boxed rear arms, and the 002 trans are all sold (002 is pending in reality). Parts still available are the Wright 1600 front arms, the Foddrill (?) 1600 tubular rear arms, the T3 Wide 5 rear brakes (complete), a Chenowth 9" over beam with through rods and a complete Wright 12" over beam with towers, adjusters,and hard stops (probably too wide for the woods I'm guessing), a turnkey race-built 1600 (de-tuned for play and/or street) with dual Dellortos, Web dual grind cam, remote filter, remote cooler and fuel pump, etc. Again, I hope its ok to post a link. No problem shipping any of the parts to the lower 48, except the motors. Thanks. Here ya go: http://www.shoptalkforums.com/viewtopic.php?t=121707

TRANNY PM ME ABOUT IT HOW MUCH

The 002 is pending. Took a small deposit on it, but the fella has been kinda quite. I'm starting to wonder if he came up with the funds. Supposed to ship it out tomorrow, but we'll see. Thanks.

let me know if u get rid of it or not

Will do. Thanks.

0O2 sold.

1600 rear tubular chromoly arms. Aprox 1" over. Used, but in very good condition. Part nos WW 1608 and WW 1609 so most likely Woods, but might be Wright like everything else on my buggy, although not certain.

how much for the rear shocks

I sold all the shocks I'm selling at this point. Those old Fox rezies with the 7/8" shaft in the pic are staying put for now. Well, when I install the new rear arms they are staying put. Perhaps someday there will be bypasses out behind the as-yet purchased C/Os, but the wallet is getting mighty thin, so for now I gotta keep them. Thanks.

40 Dellorto everything but air filter element. Tab where manifold bolts to center motor stud cracked off. Still have it if wanting to weld it back on. Used a larger washer instead and worked fine. $289 OBO Very nice condition.

Chris, I wasn't planning on selling my rear-rear shocks, but started mocking up my new rear arms today. Looks like my 12s will have to go at some point (perhaps in a couple of weeks). Older Foxes (weld top) 2.0 body, 7/8 shaft, large 2.5 rezies with Aeroquip hoses. Shafts in great shape and no leaks. Don't even have a pic of them right now.

However, for your veiwing pleasure, check out the 1600 rear arms (approx 1" over). Finished pulling them today and cleaned them up a bit.

300M Torsion Bars. 26 9/16" length, 23mm thickness. Great shape. $100 OBO plus 20 shipping to lower 48. Make offer. I'm switching to coilover (once I can afford the shocks). No issues with these torsion bars.

For $20 more, you can have the spring plates used with these torsion bars.

Thanks.

The single Delorto DRLA is pending.
1600 Rear Arms are SOLD.
T3 Brakes are sold

Single DRLA sold
Rear shocks sold (no shocks left)
Rear Torsions sold

Buddy is buying my motor out of my buggy in long block form for street use.

That means dual 40 DRLA with jet Drs, CB linkage and air cleaners and uni pre-filters along with sync and Delorto bible and facet fuel pump, and stacks and manifolds. We're talking complete. $525/20 ship.

Tri-mil ceramic coated exhaust with u bend and muffler. Little use, mostly in Baja (a few hundred miles) $199/20 ship.

Remote filter, oil cooler with Spal fan, breather, and remote blockoff (whatever its called. Its the part that the hoses attach to and it replaces the stock oil cooler), and connecting hoses. Sold

Wright Place 12" over beam still available.

Thanks.

Do you still have the 9" over front end? If so does this come complete?

_________________
"IT IS WHAT IT IS"

Still have it although some guy claimed he was buying it. Never happened. Only includes the through rods. Thanks.

Chenowth beam now sold.

Spare motor. needs rings/jugs or hone most likely. $500 in the Pacific Northwest. Since not willing to ship, I'm willing to part.

Zenith carb, manifold, aircleaner. Sold

Alumn slant shroud> sold

Alternator sold

Tri-mil 1 5/8 sold

See anything else on there you like, shoot me an offer.

Heading down to Baja soon. Will not be able to respond to e-mails/sell parts after 12/19 until Mid-January. Thanks.