I need to replace my rear spring plate bushings. I had the red poly ones in my old buggy and they squeaked like mad. Do they make better ones that don’t squeak? I found some rubber ones but they want $80 a side

Something else to consider is the conversion,,,but make sure you get the real good heims..I fabbed up my own and they work great,,, before that I used neoprene bushings,,,my buggy squeeks everywhere anyway

_________________
If your clutch ain't slippin,, you probably got it adjusted right!!!!!

get the red poly ones cover them with anti seize

You still running air bags or do you have torsion springs?

_________________
Of all the things I've lost, I miss my mind the most.
M
A
G
A

Get the YELLOW ones from McKenzies or SACO. They are way better than the red poly bushings. Coat them with the break in grease you get with them.

_________________
________________________________

Buy the best and cry once.

I’m running stock dual spring plate torsion with sway away bars. What do I need they have 2”, 1-7/8”, and 1-3/4” sizes listed on Saco? They also list them as Flange, Knobby or Round and the 2” are red. I haven't had time to pull it apart yet thats why I ask.

Check it out here
http://www.sacoautoparts.com/products.php?cat=28&pg=2