travisdunebuggy wrote:
Roy wrote:
Yes I think it is. Not positive about that though.
Well i took the car {super beetle} tranny apart the gears are alittle differant the bus small gear had17 teeth the car had 15 which woul be better or so you would think any waythe gears are even made a little different the bus has a carrier that fits on each side of the gear kind of like a {C} shape the car is kind of like i think 5 rib can i modify or use a reverse linkage or will it even work????????????????

You must have the shift fork style reverse.
The Beetle tranny must have been the pin style.
You can upgrade the reverse linkage to the later style with the appropriate parts.
Gotta match the little gear with the slider.
IIRC the 15 goes with the 40 slider and the 17 goes with a 44 tooth slider.
Along with having the appropriate linkage.
_________________
Gary
Turbo VW Sand Racer
Polaris Ranger
"If you don't run into the Devil every once in awhile, you must be going in the same direction!"
Davis Motorsports FaceBook Page