Dammit........

Just got informed CNC is closing. Chuck is retiring.
Sometime in May.......

Dammit......dammit.......dammit........

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page

turbo buy him out

[quote='rockrockets1']turbo buy him out[/quote]

Cut me the check Rock and I'll Git-r-done.........

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page

If I had it I would buy him out HA HA

turbo if you do I will buy from you

Well that sucks!

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!

Dont worry! His brother makes the Neal stuff, or so I've heard.

I like it better anyways. A little higher but looks better and lasts longer.

Now when he retires too, That WILL suck.

Larry

[quote='kybuggy1']Dont worry! His brother makes the Neal stuff, or so I've heard.

I like it better anyways. A little higher but looks better and lasts longer.

Now when he retires too, That WILL suck.

Larry[/quote]

Other than the CNC knobs vs. Neal bicycle grips on the steering brakes,
(which slip off like a cheap rubber in most situations) their products are almost identical and take the same rebuild kits.
Don't know how Neal can last longe

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page

[quote='turboblue'] their products are almost identical and take the same rebuild kits.
[/quote]

That's what I was wondering about, I just bought CNC everything, pedal assembly, rear cutting brakes and front hand brake and slave cylinder.

Thanks for the update.

_________________
Bryan

[quote='turboblue'][quote='kybuggy1']Dont worry! His brother makes the Neal stuff, or so I've heard.

I like it better anyways. A little higher but looks better and lasts longer.

Now when he retires too, That WILL suck.

Larry[/quote]

Other than the CNC knobs vs. Neal bicycle grips on the steering brakes,
(which slip off like a cheap rubber in most situations) their products are almost identical and take the same rebuild kits.
Do

[quote='kybuggy1'][quote='turboblue'][quote='kybuggy1']Dont worry! His brother makes the Neal stuff, or so I've heard.

I like it better anyways. A little higher but looks better and lasts longer.

Now when he retires too, That WILL suck.

Larry[/quote]

Other than the CNC knobs vs. Neal bicycle grips on the steering brakes,
(which slip off like a cheap rubber in most situations) their products are almost identical and

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page

i would not think they would shut down

_________________
i dont always ride my buggy but when i do im glad it has a bad ass bow tie makin the horsepower

Jesus loves me, but everyone else thinks im an asshole.

Our Lady of Blessed Acceleration, don't fail us now!

Gary,

You would think parts availability would continue for a while after they close or should I stock up on spare parts and rebuild kits now? I want to keep my buggy alive till I am dead.

[quote='Roy']Gary,

You would think parts availability would continue for a while after they close or should I stock up on spare parts and rebuild kits now? I want to keep my buggy alive till I am dead.[/quote]

I dunno Roy.
In the automotive industry a supplier has to be abe to reproduce a part for at least 10 years.
Bet this don't apply.

Neal products do interchange for the most part so repair parts shouldn't be a problem down the road.
I am going to order some CNC toda

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page

I will PM you. I want to order some spare parts.

Roy

I read on Shoptalkforums today that CNC has new owners and will stay in business.

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!

Yeah they sent out that info about a week ago to their dealers.
I just forgot to post anything.........

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page

I bet that made you a happy Man!

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!

thats good news

yeah great news i yet to get some pedals and steering brakes for my buggy