It is currently Sun May 03, 2026 5:11 am

Board index » Tech and Fab » Air Cooled Engines

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 25 posts ] 
Author Message
 Post subject: Heat for buggy?
PostPosted: Sat Feb 16, 2008 11:35 pm 
Offline
User avatar

Joined: Mon Oct 22, 2007 8:25 pm
Posts: 271
Location: kingsport tn
I did a search for this and couldn't get anything but a page of numbers and letters that all run together! Even though winter is almost over --- i am looking for some other ideas for heat in my buggy! It being an air cooled VW is the reason to post in this section. I run fully enclosed body with doors,and want family to be a little more comfortable during the really cold rides. [below freezing] wuss :lol: I used a bilge blower from a boat to take hot air from under heads of eng and didn't get enough- tryed making a exhaust heater like a bug would have and it got some better. Any ideas would be great --I have six months till we get to needing the heat!!!!!!!!!! Thanks everyone for your help!!! Mark

_________________
Mark

That's what I'm talking about!

High speed
Low drag
Teflon coated
And ready for action!


Last edited by buggy66 on Sat Feb 16, 2008 11:42 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Sat Feb 16, 2008 11:40 pm 
Offline
BOTM Winner
User avatar

Joined: Tue Dec 26, 2006 7:14 pm
Posts: 1262
Location: connellsville,pa
i got a gas heater out of a thing.not sure how it works.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Feb 16, 2008 11:46 pm 
Offline
User avatar

Joined: Mon Oct 22, 2007 8:25 pm
Posts: 271
Location: kingsport tn
I have seen one of those ---not sure how good or safe they are but would like to look at one closer.

_________________
Mark

That's what I'm talking about!

High speed
Low drag
Teflon coated
And ready for action!


Top
 Profile  
 
 Post subject:
PostPosted: Sat Feb 16, 2008 11:47 pm 
Offline
User avatar

Joined: Mon Oct 22, 2007 8:25 pm
Posts: 271
Location: kingsport tn
Do you use it in your buggy? Maybe i misread your post. If so how well does it work?

_________________
Mark

That's what I'm talking about!

High speed
Low drag
Teflon coated
And ready for action!


Top
 Profile  
 
 Post subject:
PostPosted: Sun Feb 17, 2008 12:01 am 
Offline
BOTM Winner
User avatar

Joined: Tue Dec 26, 2006 7:14 pm
Posts: 1262
Location: connellsville,pa
no i may sell it . dont know much about them.i'll get some pics.


Top
 Profile  
 
 Post subject:
PostPosted: Sun Feb 17, 2008 12:07 am 
Offline
User avatar

Joined: Mon Oct 22, 2007 8:25 pm
Posts: 271
Location: kingsport tn
cool -let me know

_________________
Mark

That's what I'm talking about!

High speed
Low drag
Teflon coated
And ready for action!


Top
 Profile  
 
 Post subject:
PostPosted: Sun Feb 17, 2008 7:27 am 
Offline
BOTM Winner
User avatar

Joined: Mon Dec 25, 2006 1:57 pm
Posts: 1343
Location: Patrick Springs, Virginia
Why not just use some regular heat exchangers like the stock style? I heard that there is a company making them with a larger exhaust tube in them for performance applications. I have never looked into this but maybe you can find some information on these somewhere?

Roy


Top
 Profile  
 
 Post subject:
PostPosted: Sun Feb 17, 2008 8:57 am 
Offline
WB Contributor
User avatar

Joined: Tue Jun 26, 2007 9:17 am
Posts: 1461
Location: Harmony Pa Wellsville rocks!!
Why cant you take your rad, oops "oil cooler" and use it to heat your cab with a slower fan. You may have to restrict some of air going in the normal fan to build a little more engine heat. I dont know how much heat it would make. If its mounted in the right place you could reverse it to push air in the cab in the winter and oposit in the summer

_________________
"YOU CAN MAKE THINGS HAPPEN, WATCH THINGS HAPPEN OR WONDER WHAT THE F$$K HAPPEND...WE'RE MAKING THINGS HAPPEN" The strong words of Captain Phil! Rest in peice!


Top
 Profile  
 
 Post subject:
PostPosted: Sun Feb 17, 2008 9:54 am 
Offline
WB Videographer
User avatar

Joined: Tue Dec 25, 2007 12:40 pm
Posts: 1617
Location: selmer tn. pickwick tn.
thats what i did on the baja,the oil cooler was in the back of the car,under the back glass,had a switch on the blower motor,worked great


Top
 Profile  
 
 Post subject:
PostPosted: Sun Feb 17, 2008 11:01 am 
Insulated coveralls :lol:











I have seen some guys use their oil cooler fan also.


Top
  
 
 Post subject:
PostPosted: Sun Feb 17, 2008 11:34 am 
Offline
User avatar

Joined: Mon Oct 22, 2007 8:25 pm
Posts: 271
Location: kingsport tn
I have thought aboout the oil cooler as a heat sorce but didn't know how much it would provide. Might could do the 'j'tubes and oil cooler combo. I do have a large oil cooler/fan I got from Moores Parts that I am running now. It would be fairly easy to build ducts from cooler to inside?
As for the coveralls--- I get so many layers on I can't drive! [wuss] :lol:

_________________
Mark

That's what I'm talking about!

High speed
Low drag
Teflon coated
And ready for action!


Top
 Profile  
 
 Post subject:
PostPosted: Sun Feb 17, 2008 12:14 pm 
Offline
BOTM Winner
User avatar

Joined: Sun Dec 02, 2007 10:52 pm
Posts: 1561
Location: Minford, Ohio
[quote='bruce 1']Insulated coveralls :lol: [/quote]

I agree with Bruce1, that will work!!, works fine for me!! :lol:

_________________
"Loud pipes saves lives"


Top
 Profile  
 
 Post subject: heat
PostPosted: Sun Feb 17, 2008 4:31 pm 
Offline

Joined: Sun Jan 06, 2008 11:10 pm
Posts: 11
Location: PellCity Alabama
Here in Alabama when we rode bajas in the winter we all had gas heaters from things or busses. They work the best.I have also seen them in a few enclosed rails. Their was at one time a company in Hot VW's remanufacturing them called JB's Heater service. Nothing you can come up with will work as good as these.I have tried almost everything their is.From sterno cans to blower motors to coverall's. We croosed a lot of deep creeks here in the winter so we needed some real heat.


Top
 Profile  
 
 Post subject:
PostPosted: Sun Feb 17, 2008 5:15 pm 
Offline
Hill Climber

Joined: Fri Apr 11, 2008 3:06 pm
Posts: 1859
Location: Republic of Texas
I have heard of guys routing a tube into the buggy and back out. Then run the exhaust thru it.

_________________
It's amazing what you can accomplish when you don't care who gets the credit.-
Harry S. Truman


Top
 Profile  
 
 Post subject:
PostPosted: Sun Feb 17, 2008 8:36 pm 
One thing I do is I use the HOT HANDS, I put one in each pocket. (They are the things you can buy at Wally world in the sporting goods section, that you take out of the pack and shake up, and then they get warm) They seam to help a lot. Also use insulated rain suits or un-insinuated is what I use and wear very few clothes under them and stay very warm and dry. The rain suits seam to be warmer than coveralls.


Top
  
 
 Post subject:
PostPosted: Mon Feb 18, 2008 11:29 am 
Offline
WB Contributor
User avatar

Joined: Mon Feb 26, 2007 4:49 pm
Posts: 1402
Location: Hohenwald , TN
I have seen the guys I ride with take a bilge pump and hoses from the motor pulling the hot air in and pumping it up to the driver and passenger. Theres enough heat off the motor to keep you warm.

The Wild Kids

_________________
I refuse to grow up therefore I will never grow old, and I will never die.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Feb 22, 2008 10:55 pm 
Offline
User avatar

Joined: Mon Dec 10, 2007 7:42 pm
Posts: 462
Location: toronto,ohio
hook up a power inverter and run a small ceramic heater from lowes

_________________
harleys and vws----ac all the way

I love my country, But i fear my government


Top
 Profile  
 
 Post subject:
PostPosted: Fri Feb 22, 2008 11:07 pm 
Offline
User avatar

Joined: Mon Oct 22, 2007 8:25 pm
Posts: 271
Location: kingsport tn
Have thought about all of these ideas. Have not decided on what will work best.
Last year I wrapped one header tube w/ perferated sheetmetal strips that were 2" wided [three wraps each- total of 5 sections. Inserted a 12volt heating element from rv fridge into sheet wraps and covered w/ alum sheet-connected 3" hose w/ bilge blower and ran duct to windshield. Worked good except drain on charging system-I couldnt run lights while running heat.
Thanks for all your answers and ideas---keep them coming . We may come up with the ultimate heat for buggies.
Mark

_________________
Mark

That's what I'm talking about!

High speed
Low drag
Teflon coated
And ready for action!


Top
 Profile  
 
 Post subject:
PostPosted: Fri Feb 22, 2008 11:12 pm 
Offline
WB Contributor
User avatar

Joined: Tue Jun 26, 2007 9:17 am
Posts: 1461
Location: Harmony Pa Wellsville rocks!!
Wonder if you can run your oil thru this?
[img][img]http://i223.photobucket.com/albums/dd87/jem203/flx-640.jpg[/img][/img]

_________________
"YOU CAN MAKE THINGS HAPPEN, WATCH THINGS HAPPEN OR WONDER WHAT THE F$$K HAPPEND...WE'RE MAKING THINGS HAPPEN" The strong words of Captain Phil! Rest in peice!


Top
 Profile  
 
 Post subject:
PostPosted: Sat Feb 23, 2008 6:55 am 
Offline
User avatar

Joined: Mon Oct 22, 2007 8:25 pm
Posts: 271
Location: kingsport tn
Is that a heater core /fan combo? What is it out of? Yhat is a nice lookimg rig.

_________________
Mark

That's what I'm talking about!

High speed
Low drag
Teflon coated
And ready for action!


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 28, 2008 12:17 am 
Offline
BOTM Winner
User avatar

Joined: Tue Dec 26, 2006 7:14 pm
Posts: 1262
Location: connellsville,pa
Image
Image
Image
heres pics of the thing heater. dont know much about them this one isn't rusty and the fan spins freely it may work no idea.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 28, 2008 10:32 am 
Offline
User avatar

Joined: Thu Jul 05, 2007 9:00 pm
Posts: 196
Location: Cookeville, TN
I had a single seater with body panels on it. The oil cooler was mounted near the floor board beside the seat. In the winter, I would reverse the leeds on the fan and it kept me comfortable with 2 layers of regular clothes in below freezing temps.

In my w/c it is mostly the same. Only difference is the radiator puts off so much heat that you can ride in shorts and t-shirt in below freezing weather.

_________________
Where did you say the weenie trail is?


Top
 Profile  
 
 Post subject: Re: Heat for buggy?
PostPosted: Thu May 08, 2008 9:06 pm 
Offline

Joined: Wed Dec 19, 2007 9:58 pm
Posts: 29
Location: harriman tn
3 in hose from bottom of head and cyl sucked tc cab with boat bildge blower easy 120deg cost about $3o.00 works great wildbill


Top
 Profile  
 
 Post subject: Re: Heat for buggy?
PostPosted: Fri May 09, 2008 3:23 pm 
Offline
User avatar

Joined: Thu Jul 05, 2007 9:00 pm
Posts: 196
Location: Cookeville, TN
Its about time you posted something! :roll:

_________________
Where did you say the weenie trail is?


Top
 Profile  
 
 Post subject: Re: Heat for buggy?
PostPosted: Fri May 09, 2008 11:16 pm 
Offline
User avatar

Joined: Mon Oct 22, 2007 8:25 pm
Posts: 271
Location: kingsport tn
I tried bilge blower on last buggy but didnt get much heat from it,even wrapped w/ insulation and alum tape. I think the open skid plate was the problem. Also when we did water crossing there was always steam being forces into cab along with some burning mud smells. I may try it again thou>

_________________
Mark

That's what I'm talking about!

High speed
Low drag
Teflon coated
And ready for action!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 25 posts ] 

Board index » Tech and Fab » Air Cooled Engines

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group