Well I finally got to the body panels, what a pain! I finished the side panels, roof, partial hood and dash. The dash gets a lot more work since I haven't gotten the switches or indicator lights mounted. The light bar still needs the rear support struts fabbed up. The HID lights came from Arizona. They were originally sold at Kragen Auto Parts but have been discontinued. A few dealers out west are still stocking them at $109 each. HID's can't usually be touched for less than $300 each. The Lowrance GPS in the middle of the dash is color and more of a straight line GPS, meaning its perfect for off road. Yes I get lost easily but more importantly it will be used as a speedo to be street legal.

Here it is without the light bar.


With the light bar.


Side panel.


Dash with the color GPS that will be used as a speedo.


Light bar and HID's close up. Still needs the supports to the roof.


Back of light bar.


Partial hood to hide the wiring and electronics.

Looks bad ass!!Thats a stalker frame right?Thats what I have they are sweet frames.

aaron

Actually it started out as a custom ordered Beeline frame but didn't work out quite like I wanted so I cut it up and basically made my own. I reused the floor portion from the original frame and bent my own from there. Yes its basically modeled after the stalker.

Awesome. I want a ride.

man, that is nice.

[quote='Roy']Awesome. I want a ride. [/quote]

Ride hell, let me drive......... 8)

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page

NICE MACHINE!!!!DO U GET PARTS OFF OF LARRYS OFFROAD?

_________________
LIFE IS TO SHORT! FLIP IT WHILE YOU CAN!!

Thats a Baaaaad buggie !

hey flip it i was just wondering is that photo your avatar because on my screen it is very big but maybe it is just my computer

might try this

[quote='volksdude2007']hey flip it i was just wondering is that photo your avatar because on my screen it is very big but maybe it is just my computer[/quote]

It ain't your computer.

Flipit, you need to resize your avatar.
It's taking up a lot of screen on this end........

Try this program:
www.irfanview.com

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page

OK SORRY JUST LEARNING

_________________
LIFE IS TO SHORT! FLIP IT WHILE YOU CAN!!

BACKWOODS ANYTIME LOTS OF FUN 11 BARS TOUCH WATER

_________________
LIFE IS TO SHORT! FLIP IT WHILE YOU CAN!!

GAMNTRAIL THANK U

_________________
LIFE IS TO SHORT! FLIP IT WHILE YOU CAN!!

will call him SUPER AVATAR

just go in and use this as your avatar

http://i32.tinypic.com/bfop4i.jpg

Flipit try this i went ahead and resized it for you. This should be standard avetar size.

Hey flipit, I have used Larry's and Drew's for a lot of parts on my last rail. I have ordered most of the parts on the internet since a lot of them are pretty specialty type parts. I made the frame, beam, suspension, trans mounts and most everything else. Since I'm water cooled a lot of parts came from Jegs and Summit Racing. I need parts that neither Drew's or Larry's carry like radiator, overflow tank, EFI fuel pump and filter etc. I really like both places and hope Larry's makes it, they always seem to be struggling. There is a ton of knowledge at that place.

Damn, does that look good. You must have over $1000 in HID's. We won't need lights if we ride with you.(lol) Keep up the pic's

_________________
When in doubt, hit it in second gear!

BACKWOODS/KYLE THANK YOU!! HOPEFULLY ILL GET IT DAM I HATE COMPUTERS SOMETIMES

_________________
LIFE IS TO SHORT! FLIP IT WHILE YOU CAN!!

bentley of buggies, haha. that thing is badass, i want it haha. if only you had a flip out dvd player though (j/k)! doin it right, great job!

FORTYDEGNORTH -- I AGREE VERY GOOD PEOPLE ALWAYS BEEN RIGHT 2 ME!!HOPE THEY MAKE IT 2

_________________
LIFE IS TO SHORT! FLIP IT WHILE YOU CAN!!

The DVD player would be nice I have one in my truck that I use with a backup camera. Never even put a DVD in it! The radio next to the wheel is a CD player, the face flips down. Everything on it is sealed and is meant for marine use to keep water out. I have marine speakers that will mount behind the seats. I spent a couple years gathering parts and building to keep the cost a little easier to swallow. Hey Flipit I lived in Galloway for a year when I was working in Columbus. I live in Glenchester Lakes apartments. Columbus is taking you guys over you'll end up in London or Springfield before long! Thanks for the compliments it keeps me motivated. I'm thinking gloss black frame and brushed alluminum panels, what do you think? Hey DVS1 the HID's were $456 shipped for all four.

WOW, $456, thats a smokin deal! I was gonna go with them, but the cheapest I could find them was about $600 a pair.

_________________
When in doubt, hit it in second gear!

flipit at the top of the page click

PROFILE

then scroll down and where it says upload avatar from url type in

http://i32.tinypic.com/bfop4i.jpg

then hit submit at the bottom. that will fix ya right up

kyle