this is where i have gotton too on my paint striping and all the other things on my buggy...





I had questions about my rear tires and my rear trailing arms so i also inclued pictures of them...













Hope yall like it so far

-Pomeroy

p.s i kno that some of you weld up your frames i was wondering on the welders that yall use?

looking good, you will be riding in a short time.

Looking good. What are you using to strip the paint?

I have a Millermatic 250 but its kind of overkill. A buddy of mine has a millermatic 185 I think and its more than enough.

All im using too strip the paint is a putty knife it works great but its still a pain to do it... how much would u pay for a welder like the 185?

get some zip strip to strip that p aint. messy and burns a little bit but way easier and faster.

Go to the Dollar store and get a few cans of the cheap oven cleaner. Don't get Easy Off --it dosen't work as good as the cheap brand does. Spray it on - let it set for about thrirty minutes and then spray water on to rinse the paint off. Be careful with this stuff! -it will burn very bad! Don't spray in the wind! Works great. Mark

_________________
Mark

That's what I'm talking about!

High speed
Low drag
Teflon coated
And ready for action!

Not sure what he paid for the 185 but its not cheap. I did some CAD drawings for a fab shop and traded some laber and $600 for my 250. Ill give him a call and see what he paid.

I redid a four wheeler frame and used some stuff called aircraft stripper from Napa. Its nasty shit but it did a good job. All you do is paint it on, scrape the heavy parts then spray it off with a hose. You don't want to breath it or get it on you skin. I was reading the warning label the other day while i was cleaning the shop and it kind of scared me so if you use it BE CARE FULL.

Permatex gasket remover works really well and its in a spray can. Also works well for removing gaskets lol.

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!

we have used that aircraft stuff on dads buggy (GAMNTRAIL) and i hated t he stuff i dont mind using my putty knife works really good and fast i think and it dont burn so that is a big up side

Never thought about using Oven Cleaner before, I have some of the cheap stuff that I use on my truck chrome to clean off bugs and road grim. I will try it on the buggy since we want to repaint it. Going to wait until spring when it is warmer to paint it.

The Wild Kids

_________________
I refuse to grow up therefore I will never grow old, and I will never die.

Yall just need to try the putty knife i kno that i might sound crazy but it dose a really good job