I put all new msd ignition on the ole girl..

Sent from my SCH-I605 using Tapatalk

Broke a front spindle backing out of the driveway.:(:( no riding for me for awhile.

Sent from my Galaxy S3 using TapaTalk

_________________
When in doubt pray harder!

That must be one badass driveway!

_________________
I should have stayed AC...I miss the constant wrenching.

Better to break there than out in woods somewhere it sucks riding out on 3 wheels


Sent from my iPhone using Tapatalk

_________________
if you cant run with the big dogs than slow down and make fun of the little ones

I wish the driveway was bad. That way I might would have some fun.

Sent from my Galaxy S3 using TapaTalk

_________________
When in doubt pray harder!

Must be empi spindles


Sent from my iPad using Tapatalk

_________________
Water Cooled Consortium, Chairman of the Build (Former AC purist)

No sir...German spindles. I need the solid driver side. No hollow for the speedo cable. I ride hard over then there rocks.

Sent from my Galaxy S3 using TapaTalk

_________________
When in doubt pray harder!

Pulled my CV joints because there were clicking and found the inner star on both inside and outside were cracked..

Time to buy some new CV's

_________________
Woodsbuggy forum is now on the Tapatalk Mobile app... (iPhone, iPad and Android devices)

[quote="UncleJerm76"]Cool idea using a trail cam as a time lapse for your build. [THUMBS UP SIGN]

Thanks on the thumbs up, I just wish the plot cam would save in a high quality when it transfers to a WMV file. I got rid of the carhartts and fired up the cam again today. This video is kind of boring and taking the engine components and wiring apart takes forever. On a good note I got the powder coat samples back from the powder and I am getting close to sending the panels out.

_________________
I should have stayed AC...I miss the constant wrenching.

Well I went riding out to the river yesterday and rip the motor cage slap off the buggy now I get to weld it back on.


Sent from my iPhone using Tapatalk

_________________
if you cant run with the big dogs than slow down and make fun of the little ones

I rode around alittle yesterday and climbed a few hills. First time I've been able to ride in a while.


Sent from my iPhone using Tapatalk

_________________
Using Tapatalk

Down to the bare frame...Ready for powder coating

_________________
I should have stayed AC...I miss the constant wrenching.

We rode yesterday. .. but missed you I guess Jeff

Sent from my SCH-I605 using Tapatalk

I got a few things done today, top trans mount welded, gas pedal bracket welded. By the help of my 3 yr old. He is a big help and he doesn't know how much it means.


Sent from my iPhone using Tapatalk

_________________
Using Tapatalk

one of the side bars was mangled, took some time today to lop them both off and bend up some new ones, haven't started welding them on yet, but the concern over repair or replace was decided by the weld inspections. luckily its pretty clear the buggy's chassis builder and the side bar adder weren't the same people.

How far clear of the wheel do most of you go?

finished welding up my side rails and added a 2" receiver for moving my trailer around the yard. Threw on a coat of paint on it to keep it from rusting. I am eventually going to paint it two tone, the bottom being black the top being blue... not this week though.

Finished putting transaxle and axles in. Almost ready to rip!



Sent from my iPhone using Tapatalk

Damn that looks cool is that a motorcycle engine I've never seen anything like that


Sent from my iPhone using Tapatalk

_________________
if you cant run with the big dogs than slow down and make fun of the little ones

Yes, Thanks......I've been working on it for a while.


Sent from my iPhone using Tapatalk

Took it to wellsville for first ride, it's rips ...... Thanks for the help bshimmel.


"Don't believe everything you read on the Internet."--Abraham Lincoln

Got my conversion bearings pressed in my hubs.

Sent from my Galaxy S3 using TapaTalk

_________________
When in doubt pray harder!

Haven't done nothing and off all week ugh


Dirtdobber

_________________
Using Tapatalk

Picked up some free wheel travel:lol::lol: Still working on the left side but it's almost there

Sent from my LG-P769 using Tapatalk

_________________
If it ain't broke ill fix that

Got my front spindle fixed. Now trying to get my shifting linkage right. Its popping out of first gear.


Sent from my Galaxy S3 using TapaTalk

_________________
When in doubt pray harder!

I got my spare 3 rib in. Unfortunately I think 1st gear is bad. It pops out when you let off the gas. I disconnected the linkage and shoved the shaft as far in the nose cone as possible. Didn't help. Bummer. I think this 3 rib is a 5.42. Seems to be lower than my other. It effortlessly barks my Swampers in 2nd on pavement. It also has less clearance around the lower mounting holes. Can't hardly get a 17mm wrench on them.

Sent from my Galaxy S3 using TapaTalk

_________________
When in doubt pray harder!