Does anyone have a pair of 15 5/8" axles you don't need and are willing to sale?

_________________
When in doubt pray harder!

sorry i don have any axles but you have a great looking build

I have some for 930s

_________________
Air cooled forever,i hate rusty tools!!!!!!!

I will be using them with Type 2 CVs. I found out Tuesday just how high geared an auto tranny is. Time to convert to bus. Any pointers are welcomed.
Thanks for the compliment on the build.

_________________
When in doubt pray harder!

you use the same axles for the bus transmission as the car just have to change the joint

Are you positive? Everything I read says the 002 bus tranny is a little wider than car tranny, which results in using the 15 5/8" bus axles with type 2 cvs and bus to car axle stubs. That is of course using stock size trailing arms. I never have done this so I'm trying to gather info. I just want to be sure. Thanks for your input. It makes me think more.
PS. I previously said using auto tranny. I meant car tranny.

_________________
When in doubt pray harder!

You are correct, SAW offers these axles typically for street guys with stock trailing arms and a bus trans swap when the suspension travel is not more than stock. The problem with these offroad is that the CV angle increases more when the supension travel is increased and the CVs aren't happy. Have you considered Sawerybuilts with stock bus axles? It's a pretty good value for the money spent. JMHO

What stubs you using??

I ran a bus with type 1 stubs and car axle 16.25 at 16/18 deg. For 2 years. Never had a problem on or offroad.
I changed my stubs to type 2 over the winter and running around 20deg. Still no problem but I do get some clicking some times when I back up so I to will be looking for the shorter ones. But it will work I have been to DTOR 2 times this year and around 1000miles on the street.

_________________
My ECOTEC swap http://www.woodsbuggy.com/index.php?option=com_jfusion&Itemid=10&jfile=viewtopic.php&f=23&t=11394

I am running a car tranny right now. I forget what the degree is on the axles but it is maxed out but not over that is recommed for a car cv. I just notched the spring plates a little. I just ordered a 002 tranny. So i have bought nothing yet. I think I'm going to get laid off work. So need to go cheap. Running a 1641. Its just a woods buggy. No radical hill climbing foreseen.
I have not seen or heard of Sawerybuilts. I googled it with no findings.

_________________
When in doubt pray harder!

It's a guy that makes and sells arms on here.
No sure about stock size but I know 2x3 and 3x3.

_________________
My ECOTEC swap http://www.woodsbuggy.com/index.php?option=com_jfusion&Itemid=10&jfile=viewtopic.php&f=23&t=11394

Bump

_________________
When in doubt pray harder!

Ive got some. Ill have to dig them out tomorrow an ill get a pic if ur interested.

You havent had any problems because your running those skinny tires. You put some big v cleats on there I guarantee you break cv's and axles with ecotec power. Been there done that.

I'm planning on running type 1 stubs to type 2 cv. Stock trailing arms.

_________________
When in doubt pray harder!

PM sent to ImmortalSoul219

_________________
When in doubt pray harder!

pm with pics

I got two pair one new and one used call me let's do some dealing 2563663727

_________________
Eddie~n~Sarah

I found some. Thanks for all the replies and info.
Now I need some 930 cv's. (yes, I went with 930 axle.s)

_________________
When in doubt pray harder!

ive got a set of those too