WoodsBuggy.com https://www.woodsbuggy.com/phpBB3/ |
|
Sand drag buggy https://www.woodsbuggy.com/phpBB3/viewtopic.php?f=5&t=17095 |
Page 1 of 1 |
Author: | turboblue [ Wed Jun 18, 2014 11:34 am ] |
Post subject: | Sand drag buggy |
We've been doing some testing the last few weeks on "Turbo Blue". Trying to get the boost dialed in, had a few kinks and broke the boost gauge. Either it made a lot or we had a bad gauge.... Went from 12 PSI to broke with one turn of the boost controller. Here is a low gear test shot. http://youtu.be/lIynGXKbINs |
Author: | helmetguy [ Wed Jun 18, 2014 12:36 pm ] |
Post subject: | Re: Sand drag buggy |
That looked fast!! Sent from my SCH-I545L using Tapatalk |
Author: | ky-bc [ Wed Jun 18, 2014 4:13 pm ] |
Post subject: | Re: Sand drag buggy |
Nice launch! |
Author: | Rick [ Wed Jun 18, 2014 4:38 pm ] |
Post subject: | Re: Sand drag buggy |
Not bad for an old outdated dinosaur vw air cooled |
Author: | kvw [ Wed Jun 18, 2014 9:05 pm ] |
Post subject: | Re: Sand drag buggy |
That sounds and looks awesome thanks Gary and good luck. Kenric |
Author: | turboblue [ Thu Jun 19, 2014 2:55 pm ] |
Post subject: | Re: Sand drag buggy |
Rick wrote: Not bad for an old outdated dinosaur vw air cooled Yeah it's stumbled to the finish line first a time or two Rick....... Hope to run it at Brookville Saturday night. |
Author: | turboblue [ Thu Jul 24, 2014 6:18 pm ] |
Post subject: | Re: Sand drag buggy |
Well we got the boost issue straightened out. Friend of mine did the video editing. http://youtu.be/kfLcUl57w_E http://youtu.be/Ss5NZJOnQxY And then we decided to add a wheelie bar........ |
Author: | Psycho Alpha [ Thu Jul 24, 2014 6:31 pm ] |
Post subject: | Sand drag buggy |
Nice defiantly need that wheelie bar "Don't believe everything you read on the Internet."--Abraham Lincoln |
Author: | havnot [ Thu Jul 24, 2014 7:09 pm ] |
Post subject: | Re: Sand drag buggy |
That thing is wicked was that at liberty? Did you run at the fair I wanted to go but well I just didn't sometimes I just get lazy |
Author: | turboblue [ Fri Jul 25, 2014 2:44 pm ] |
Post subject: | Re: Sand drag buggy |
havnot wrote: That thing is wicked was that at liberty? Did you run at the fair I wanted to go but well I just didn't sometimes I just get lazy Yeah we were at Liberty when we broke the shock towers off with the wheelie. Went to Brookville Saturday night. ran a 4.34 in low gear 1st pass. Shift cable popped out of its holder so it didn't shift. 2nd pass the MSD digital 6AL box took a crap so we were done........ |
Author: | havnot [ Fri Jul 25, 2014 7:52 pm ] |
Post subject: | Re: Sand drag buggy |
thats awesome get those last few gremlins worked outlet me know where you'll I'll come check that thing out I'll wear a turboblue t shirt and be your cheering section |
Author: | Rick [ Sat Jul 26, 2014 8:59 am ] |
Post subject: | Re: Sand drag buggy |
The way you ripped your foot off that accelerator pedal the pucker factor had to be huge When you get that dialed in it looks like its going to be stupid fast.... |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |