FAQ

It is currently Sat Apr 27, 2024 8:42 am

View unanswered posts | View active topics

Board index » General » Pictures and Videos

All times are UTC - 5 hours [ DST ]

dyno run "ky 1600"

Moderator: jesse

Page 1 of 1

[ 9 posts ]

Print view

Previous topic | Next topic

Author

Message

RaceBugg1098

Post subject: dyno run "ky 1600"

Posted: Tue Oct 22, 2013 7:29 am

BOTM Winner

Joined: Wed Nov 07, 2007 2:07 pm
Posts: 1599
Location: Petersburg, Ky

Kevins new secret grind cam in his 2***cc woods motor. Made 200 foot pounds of torque at 3900 rpm. Sound did not transfer very good :mrgreen:

http://youtu.be/87qUjnvxKrQ

_________________
Maybe you should chug on over to mamby pamby land....

Top

darrell

Post subject: Re: dyno run "ky 1600"

Posted: Wed Oct 23, 2013 6:32 pm

Joined: Mon Dec 27, 2010 4:13 pm
Posts: 960
Location: lockland ohio

Getting ready to try this cam just got back from drews.....with 2 gear trans should work out nice pulling the fk-43 out tonight or is it a 110 or c-35 :wink:

...

_________________
get you some

Top

bige70chevy

Post subject: Re: dyno run "ky 1600"

Posted: Wed Oct 23, 2013 7:59 pm

WB Contributor

Joined: Wed Jun 09, 2010 7:09 pm
Posts: 1025
Location: batavia ohio 45103

darrell wrote:

Getting ready to try this cam just got back from drews.....with 2 gear trans should work out nice pulling the fk-43 out tonight or is it a 110 or c-35 :wink:

...

its one of those custom ground dale earnhardt cams...14 inches of lift, and its own zip code

_________________
Hey,can you hand me those zip ties and that roll of duct tape?!

Top

hyde

Post subject: Re: dyno run "ky 1600"

Posted: Thu Oct 24, 2013 7:14 pm

Joined: Wed Dec 17, 2008 5:56 pm
Posts: 783
Location: mooers hill IN

Drews off road got the cams custom grand for me on hardcore and stroke relieved blanks .This thing has good TQ an HP for eng on pump gas.

Top

Rick

Post subject: Re: dyno run "ky 1600"

Posted: Fri Oct 25, 2013 1:12 pm

Joined: Fri Dec 28, 2007 3:44 pm
Posts: 976
Location: franklin indiana

hyde wrote:

Drews off road got the cams custom grand for me on hardcore and stroke relieved blanks .This thing has good TQ an HP for eng on pump gas.

Did you also go with the drilled valves :?:

_________________
Air cooled forever,i hate rusty tools!!!!!!!

Top

RaceBugg1098

Post subject: Re: dyno run "ky 1600"

Posted: Mon Oct 28, 2013 7:34 am

BOTM Winner

Joined: Wed Nov 07, 2007 2:07 pm
Posts: 1599
Location: Petersburg, Ky

i am pretty certain it does.

_________________
Maybe you should chug on over to mamby pamby land....

Top

vwtravis

Post subject: Re: dyno run "ky 1600"

Posted: Mon Oct 28, 2013 9:20 am

Joined: Thu Dec 06, 2007 10:55 pm
Posts: 292
Location: Charleston WV

148hp at 3900 not bad I would like to see the dyno chart on that run

Posted using the WoodsBuggy Mobile App

_________________
Travis

Top

hyde

Post subject: Re: dyno run "ky 1600"

Posted: Tue Oct 29, 2013 8:16 pm

Joined: Wed Dec 17, 2008 5:56 pm
Posts: 783
Location: mooers hill IN

150 tq 2600rpm 200tq 3900 179tq 5000 Sorry i dont have papers with me but i had this on my phone.Eng has Drews off road ported S\E heads & 44 carbes & custom 909 cam

Top

hyde

Post subject: Re: dyno run "ky 1600"

Posted: Fri Sep 26, 2014 8:52 pm

Joined: Wed Dec 17, 2008 5:56 pm
Posts: 783
Location: mooers hill IN

RaceBugg1098 wrote:

Kevins new secret grind cam in his 2***cc woods motor. Made 200 foot pounds of torque at 3900 rpm. Sound did not transfer very good :mrgreen:

http://youtu.be/87qUjnvxKrQ

Top

Page 1 of 1

[ 9 posts ]

Board index » General » Pictures and Videos

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 48 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: