| WoodsBuggy.com https://www.woodsbuggy.com/phpBB3/ |
|
| need help identifying my buggy & some wheels https://www.woodsbuggy.com/phpBB3/viewtopic.php?f=5&t=14773 |
Page 1 of 1 |
| Author: | snail rail [ Fri Feb 01, 2013 1:47 am ] |
| Post subject: | need help identifying my buggy & some wheels |
been wanting to know exactly what frame I've got. From what I've gathered it looks to be a berrien but couldn't figure out which one? I figured my best bet by far would be to ask some of you guys! And another thing, can anyone tell me what kind my front wheels are?? Any and all help like always is greatly appreciated!! 
|
|
| Author: | giveitagallon [ Fri Feb 01, 2013 8:26 am ] |
| Post subject: | Re: need help identifying my buggy & some wheels |
Spindle mount wheels , and the most I can come up on the frame is barrien but which one .. Not warrior or stalker . The way the back frame is designed has the Alabama style to it . I could be wrong all together though 
|
|
| Author: | fortydegnorth [ Fri Feb 01, 2013 8:54 am ] |
| Post subject: | Re: need help identifying my buggy & some wheels |
I'd say Fisher Frame: http://fisherbuggies.com/buggies-and-fr ... mes-welded |
|
| Author: | Red Barron [ Fri Feb 01, 2013 11:12 am ] |
| Post subject: | Re: need help identifying my buggy & some wheels |
It looks like a Rebel frame from Georgia. I don't think it is a Fischer (Price) frame. I hope I offend anyone but I have some first hand knowledge that says by a Berrian or anything other than Fischer. Pretty sad since I have know Ken Fischer for over 35 years. |
|
| Author: | reno2165 [ Fri Feb 01, 2013 5:11 pm ] |
| Post subject: | Re: need help identifying my buggy & some wheels |
giveitagallon wrote: Spindle mount wheels , and the most I can come up on the frame is barrien but which one .. Not warrior or stalker . The way the back frame is designed has the Alabama style to it . I could be wrong all together though x2.. looks like a berrien but they way the bars in the back loop around is the same as a fugitive or an invader
|
|
| Author: | turboblue [ Fri Feb 01, 2013 7:32 pm ] |
| Post subject: | Re: need help identifying my buggy & some wheels |
I think it is a Chenowth chassis.  Front wheels are 5 spoke spindles made by Johnny's speed and Chrome. JSC closed in the early '90's.  Edited to fix broken link |
|
| Author: | mudd mutt [ Fri Feb 01, 2013 10:16 pm ] |
| Post subject: | Re: need help identifying my buggy & some wheels |
Im with Gary its a Chenowth chassis there was a lot of them in the 80's and I think if memory is correct should be around 92" wb with stock arms |
|
| Author: | ridenrace6 [ Fri Feb 01, 2013 10:39 pm ] |
| Post subject: | Re: need help identifying my buggy & some wheels |
mudd mutt wrote: Im with Gary its a Chenowth chassis there was a lot of them in the 80's and I think if memory is correct should be around 92" wb with stock arms x3 |
|
| Author: | snail rail [ Sat Feb 02, 2013 1:28 pm ] |
| Post subject: | Re: need help identifying my buggy & some wheels |
Wheelbase is right at 103" but it's been lengthend at some point. Thanks guys |
|
| Author: | purplerail [ Sat Feb 02, 2013 4:47 pm ] |
| Post subject: | Re: need help identifying my buggy & some wheels |
i had a jsc frame like that |
|
| Author: | turboblue [ Mon Feb 04, 2013 2:25 pm ] |
| Post subject: | Re: need help identifying my buggy & some wheels |
purplerail wrote: i had a jsc frame like that They look similar in the rear cage area to a Chenowth but the top and windshield frame is probably like this one. 
|
|
| Author: | reno2165 [ Mon Feb 04, 2013 7:15 pm ] |
| Post subject: | Re: need help identifying my buggy & some wheels |
turboblue wrote: purplerail wrote: i had a jsc frame like that They look similar in the rear cage area to a Chenowth but the top and windshield frame is probably like this one. thats an invader |
|
| Author: | jesse [ Mon Feb 04, 2013 10:29 pm ] |
| Post subject: | Re: need help identifying my buggy & some wheels |
its a fugitive 
|
|
| Author: | reno2165 [ Mon Feb 04, 2013 10:59 pm ] |
| Post subject: | Re: need help identifying my buggy & some wheels |
jesse wrote: its a fugitive you rite, i meant fugitve... rode one for 8 years, very good climbing chassis 
|
|
| Author: | turboblue [ Tue Feb 05, 2013 11:58 am ] |
| Post subject: | Re: need help identifying my buggy & some wheels |
reno2165 wrote: turboblue wrote: purplerail wrote: i had a jsc frame like that They look similar in the rear cage area to a Chenowth but the top and windshield frame is probably like this one. thats an invader Agreed. Invader was made by Johnny's Speed and Chrome. purplerail said he had a JSC chassis. Fugitive is a Bugpack chassis, they look very similar. |
|
| Author: | snail rail [ Tue Feb 05, 2013 10:49 pm ] |
| Post subject: | Re: need help identifying my buggy & some wheels |
so is everyone agreeing that it's a chenowth? It doesn't really matter what it is to me really but it's just one of those things thats nice to know. thanks guys. Since yall figured this one out so fast can you look at my other one and see what it is? Posting a pic of it below.... 
|
|
| Author: | mudd mutt [ Thu Feb 07, 2013 2:23 am ] |
| Post subject: | Re: need help identifying my buggy & some wheels |
snail rail wrote: so is everyone agreeing that it's a chenowth? It doesn't really matter what it is to me really but it's just one of those things thats nice to know. thanks guys. Since yall figured this one out so fast can you look at my other one and see what it is? Posting a pic of it below.... If the tubing is 1.750 od its called Advenger they were sold in the 70's early 80's |
|
| Author: | turboblue [ Thu Feb 07, 2013 12:00 pm ] |
| Post subject: | Re: need help identifying my buggy & some wheels |
mudd mutt wrote: snail rail wrote: so is everyone agreeing that it's a chenowth? It doesn't really matter what it is to me really but it's just one of those things thats nice to know. thanks guys. Since yall figured this one out so fast can you look at my other one and see what it is? Posting a pic of it below.... If the tubing is 1.750 od its called Advenger they were sold in the 70's early 80's You remember those? What were you then, about 40?...........
|
|
| Author: | Red Barron [ Thu Feb 07, 2013 12:31 pm ] |
| Post subject: | Re: need help identifying my buggy & some wheels |
If it is a Chenoweth frame it will have a id plate on the passenger side on the lower horizontal windshield bar. |
|
| Author: | outlaw [ Thu Feb 07, 2013 9:17 pm ] |
| Post subject: | Re: need help identifying my buggy & some wheels |
I have a frame that looks like the one snail rail is selling, I have never heard of Advenger. Did they make different wheelbase's for different models, and where were they made? I also wondered if Chenoweth ever made a frame with a chopped top? I know where there is a buggy that looks like a Chenoweth, but it has a chopped top, and I was wondering, could it be factory, or is it custom? |
|
| Author: | mudd mutt [ Fri Feb 08, 2013 2:34 am ] |
| Post subject: | Re: need help identifying my buggy & some wheels |
turboblue wrote: mudd mutt wrote: snail rail wrote: so is everyone agreeing that it's a chenowth? It doesn't really matter what it is to me really but it's just one of those things thats nice to know. thanks guys. Since yall figured this one out so fast can you look at my other one and see what it is? Posting a pic of it below.... If the tubing is 1.750 od its called Advenger they were sold in the 70's early 80's You remember those? What were you then, about 40?........... HAHAHA I think we're both old enough to remember them,,it was actually my 1st "factory" frame and it was spring 1979 so no I wasnt 40 lol then Ive had about 4 other berrien frames and now I got a stalker Not sure were the Advengers were made but I bought mine from a tire store up around Youngstown Akron if memory is correct |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|