Put new arms on buggy,I put 1 washer on outside part of arm. I did not on trans side of arm. what did i do wrong ? arm is binding, bolt is almost threw flange. Can somebody help?

You should have 2 washers on the outside of the arm. Make sure you have the metal tube in the rubber bushing too.

_________________
"YOU CAN MAKE THINGS HAPPEN, WATCH THINGS HAPPEN OR WONDER WHAT THE F$$K HAPPEND...WE'RE MAKING THINGS HAPPEN" The strong words of Captain Phil! Rest in peice!

I can't remember if it is 1 or 2 washers against the pivot bolt head,but I know they go on the outside.

_________________
A broken clock is right two times a day.

suby steve beat me, but thats right.

_________________
A broken clock is right two times a day.

Both washers go on the outside of the arm between the bolt head and arm.





This one only has had only one washer for the last three years as I only had a spare pivot bolt but no spare washer out on the trail when one fell out..

Hope this helps.

Thanks everyone ,stumped me alittle when didnt match. Putting together in morning. Post pics soon...