WoodsBuggy.com https://www.woodsbuggy.com/phpBB3/ |
|
The GSXR WOODSBUGGY rebuild https://www.woodsbuggy.com/phpBB3/viewtopic.php?f=23&t=17797 |
Page 1 of 1 |
Author: | Psycho Alpha [ Sun May 31, 2015 6:59 pm ] |
Post subject: | The GSXR WOODSBUGGY rebuild |
My main goal is better safety(my head is at roof), comfort(can't get susp seat in there), and performance(moving some weight back,the front never gets light). *GONNA TRY AND DO SWITCH IN 30 DAYS FOR JULY 4 RIDE IN THE VILLE* My current buggy stats 105" wheelbase 1x4 front arms 3x3 rear arms Walker Evens coilovers 80" wide at rear tires 29" rear tires 17" ground clearance 1300lbs 2006 GSXR 750cc engine 145 HP according to goggle Jeffco transaxle |
Author: | Psycho Alpha [ Sun May 31, 2015 7:00 pm ] |
Post subject: | The GSXR WOODSBUGGY rebuild |
New frame is a stalker I pick up for a steal. I thought for sure it would be heavy but it weights same as current frame bare! |
Author: | Psycho Alpha [ Sun May 31, 2015 7:02 pm ] |
Post subject: | The GSXR WOODSBUGGY rebuild |
Got all the tube bent for changes to run gsxr powertrain was going to run them vertical but like the look with them turned out |
Author: | Psycho Alpha [ Sun May 31, 2015 7:07 pm ] |
Post subject: | Re: The GSXR WOODSBUGGY rebuild |
Frame all ready had torsion housing in it so I was gonna leave it alone. But didn't like how it thin horns where and how it looked looked. So it's all coming out and getting aftermarket irs pivots |
Author: | Psycho Alpha [ Sun May 31, 2015 7:30 pm ] |
Post subject: | The GSXR WOODSBUGGY rebuild |
Switching to 2x3 but can't find micro so using VW style ones I have. Trying to stay under 80" with stones currently I'm 86" wide Wheel base on new frame should about 99" |
Author: | Psycho Alpha [ Sun May 31, 2015 8:29 pm ] |
Post subject: | Re: The GSXR WOODSBUGGY rebuild |
I gotta get these beadlocks |
Author: | bluebuggy [ Sun May 31, 2015 9:38 pm ] |
Post subject: | Re: The GSXR WOODSBUGGY rebuild |
Psycho Alpha wrote: I gotta get these beadlocks Take 36 bolts off for 4 lugs no thanks. Lol I like your buggy and setup can't wait to see the new setup. |
Author: | bigDsmith [ Sun May 31, 2015 10:30 pm ] |
Post subject: | Re: The GSXR WOODSBUGGY rebuild |
X2 on that setup. Love those RPMs. Anxious to see it in 30 days. |
Author: | Psycho Alpha [ Mon Jun 01, 2015 3:45 pm ] |
Post subject: | Re: The GSXR WOODSBUGGY rebuild |
Thanks guys, hope version 2.0 exceeds my expectations like last one did. |
Author: | hillaholic [ Thu Jun 04, 2015 1:19 am ] |
Post subject: | Re: The GSXR WOODSBUGGY rebuild |
Very nice. I need to talk my brother into taking his Hayabusa sand rail to Wellsville. |
Author: | Psycho Alpha [ Sat Jun 20, 2015 7:37 pm ] |
Post subject: | Re: The GSXR WOODSBUGGY rebuild |
It took me 7 hrs but I got all the stock stuff cut off beam and cleaned up for new IRS pivots. Question any on remember how many degrees the pivots are set at....... 7*? Attachment: Attachment:
|
Author: | Psycho Alpha [ Mon Jul 06, 2015 8:20 pm ] |
Post subject: | Re: The GSXR WOODSBUGGY rebuild |
After I stuffed buggy into a bank and bent the front beam, I pulled the trigger on tearing down buggy. Attachment: Attachment: Attachment:
|
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |