WoodsBuggy.com https://www.woodsbuggy.com/phpBB3/ |
|
rear rotor ? https://www.woodsbuggy.com/phpBB3/viewtopic.php?f=10&t=16726 |
Page 1 of 1 |
Author: | kymtnman [ Fri Feb 28, 2014 12:11 pm ] |
Post subject: | rear rotor ? |
im running sentra calipers,on the rear, the rotors I have don't have enough dish- offset to them so making mounting brackets for the calipers is going to be a pain.its not going to be far enough back to weld on top of the swing arm & they are too far back to make a plate to for the bearing cap . I'd like to know what make & model rotor most use that has the dish deep enough to mount the caliper on top of the swing arm...edit....I forgot to mention mine is set up with vw hubs cut down & some type of 5-lug rotor with vw 4- patteren drilled in them. |
Author: | bigDsmith [ Fri Feb 28, 2014 12:18 pm ] |
Post subject: | Re: rear rotor ? |
I used the Empi rotors with the Sentra calipers. 4 lug. Sent from my Galaxy S3 using TapaTalk |
Author: | riverar321 [ Fri Feb 28, 2014 4:22 pm ] |
Post subject: | Re: rear rotor ? |
If you want to use slip on rotors, Porsche 914 will work. I don't know how deep they are offhand but I have some at home I can measure later. |
Author: | riverar321 [ Sat Mar 01, 2014 8:30 pm ] |
Post subject: | Re: rear rotor ? |
Looks like 914 rotors are 2- 3/4" deep. |
Author: | kymtnman [ Sun Mar 02, 2014 1:20 pm ] |
Post subject: | Re: rear rotor ? |
that's 3/8" deeper than mine, ill pick 1 up & see if it works out better |
Author: | hpfreak [ Sun Mar 02, 2014 1:37 pm ] |
Post subject: | Re: rear rotor ? |
some pics of the process here. http://www.woodsbuggy.com/forum/brakes-and-steering/14925?hilit=caliper&start=25 |
Author: | kymtnman [ Wed Mar 05, 2014 1:44 pm ] |
Post subject: | Re: rear rotor ? |
looked up the 914's & ordered a set , thanks for the info. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |