where can I get torsional 930 axles they need to be 19 1/4.

_________________
If your clutch ain't slippin,, you probably got it adjusted right!!!!!

_________________
If your clutch ain't slippin,, you probably got it adjusted right!!!!!

Thanks for the help firebug

I cant vouch for the torsional part,,ask them ,,but I run the Dans axles with no problem,,the others are cheaper. Make double sure you are ordering the correct length.,,,,You can shorten them a dab if necessary with a chop saw. good luck

_________________
If your clutch ain't slippin,, you probably got it adjusted right!!!!!

What kind of 930 cv's do you use.

Get a set from Quicksand Performance, they make a good set of 930 cv's cheap, it will be a good set for the setup you have, but if you go big power and torque, I would rather run Lobro's and SAW axles from K-1 Kustoms. I tore up my CV and axle this past May at the Cold Spot and was running it very hard.

_________________
"Loud pipes saves lives"