It is currently Sun May 03, 2026 5:09 am

Board index » Tech and Fab » Air Cooled Engines

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: oil pressure
PostPosted: Sat May 19, 2012 8:41 pm 
Offline

Joined: Sat May 19, 2012 8:22 pm
Posts: 10
i have a ???? how much oil press should i have at idle i have like 6 lbs at idle and like 40 lbs when climig a hill is this to littel it is a stock 1600 duel port with remout oil cooler and filter


Top
 Profile  
 
 Post subject: Re: oil pressure
PostPosted: Sun May 20, 2012 5:47 pm 
Offline
WB Contributor
User avatar

Joined: Fri Sep 05, 2008 11:22 am
Posts: 1177
Location: Wellsville, Ohio
Hmm...Im not 100% sure...6 seems a little low? but then again who says the gauge is totally accurate? Think at a HOT idle, i have maybe 10-15? Really id have to go warm it up and check to be sure though.

_________________
"IT IS WHAT IT IS"


Top
 Profile  
 
 Post subject: Re: oil pressure
PostPosted: Sun May 20, 2012 8:24 pm 
Offline
User avatar

Joined: Mon Dec 27, 2010 4:13 pm
Posts: 960
Location: lockland ohio
What kind of oil and what weight are you running and is that when its hot or cold :?:

_________________
get you some


Top
 Profile  
 
 Post subject: Re: oil pressure
PostPosted: Sun May 20, 2012 9:21 pm 
Offline

Joined: Sat May 19, 2012 8:22 pm
Posts: 10
I am using pensoil 10 w 40 and that is when it is worming up ... changed the filter today and now i am runing about 10 lbs after it is worm was told to run 20w 50 in it with lucas oil aditiv a bout hafe a botel of it ... what do u think


Top
 Profile  
 
 Post subject: Re: oil pressure
PostPosted: Sun May 20, 2012 10:12 pm 
Offline
User avatar

Joined: Mon Dec 27, 2010 4:13 pm
Posts: 960
Location: lockland ohio
rushenduke wrote:
I am using pensoil 10 w 40 and that is when it is worming up ... changed the filter today and now i am runing about 10 lbs after it is worm was told to run 20w 50 in it with lucas oil aditiv a bout hafe a botel of it ... what do u think

Yeah thats what i would do and use the shortest filter that you can find that will help also .If the oil is getting hot that will make it lose press . If you got a stock oil cooler and the motor has been hot a few times they have rubber seals that will close up when over heated .Then the oil starts running warmer than it should .Anyway iv been told that ...

_________________
get you some


Top
 Profile  
 
 Post subject: Re: oil pressure
PostPosted: Mon May 21, 2012 9:04 am 
Offline
BOTM Winner
User avatar

Joined: Wed Nov 07, 2007 2:07 pm
Posts: 1599
Location: Petersburg, Ky
5psi at idle is fine. its not the best but as long as it climbs with the rpms its good. 40psi when climbing is good.

_________________
Maybe you should chug on over to mamby pamby land....


Top
 Profile  
 
 Post subject: Re: oil pressure
PostPosted: Mon May 21, 2012 12:24 pm 
Offline
BOTM Winner
User avatar

Joined: Mon Apr 30, 2007 3:35 pm
Posts: 3097
Location: Rome Ohio
Rule of thumb is 10PSI for every 1000 RPM.

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

Board index » Tech and Fab » Air Cooled Engines

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group