| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| For when the buggy just isn't quite mad enough... http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=9&t=9097 |
Page 1 of 1 |
| Author: | PhillipM [ Sat Mar 20, 2010 9:23 pm ] |
| Post subject: | For when the buggy just isn't quite mad enough... |
|
|
|
| Author: | PhillipM [ Sat Mar 20, 2010 9:29 pm ] |
| Post subject: | Re: For when the buggy just isn't quite mad enough... |
Pictures fixed 
|
|
| Author: | ImmortalSoul219 [ Sat Mar 20, 2010 10:02 pm ] |
| Post subject: | Re: For when the buggy just isn't quite mad enough... |
is that a v12! |
|
| Author: | PhillipM [ Sun Mar 21, 2010 8:40 am ] |
| Post subject: | Re: For when the buggy just isn't quite mad enough... |
 Only if you have 6 fingers on your hands  BMW V10, comfortably over the 600bhp mark... 16 inches of travel front an back, quite heavy compared to the buggy though at 2600lbs. |
|
| Author: | PhillipM [ Fri Apr 02, 2010 9:01 am ] |
| Post subject: | Re: For when the buggy just isn't quite mad enough... |
They've finished the interior today, dampers are all made and on, fuel system in, wiring harness all in, just need to mount the seats, make the oil coolers, wire the dashboard up and fit the drive and propshafts, then paint it all up. Should be ready in a few weeks. |
|
| Author: | Odyknuck [ Fri Apr 02, 2010 9:31 am ] |
| Post subject: | Re: For when the buggy just isn't quite mad enough... |
That is one Awsome car. I am sure you will have loads of fun with it. Keep the rubber side down! 
|
|
| Author: | PhillipM [ Fri Apr 02, 2010 1:45 pm ] |
| Post subject: | Re: For when the buggy just isn't quite mad enough... |
Odyknuck wrote: That is one Awsome car. I am sure you will have loads of fun with it. Keep the rubber side down! Where's the fun in that  We actually had one rolled @ 40mph last year, all it did was pop the windscreen out as the frame flexed, it sprung back in place as soon as it was rolled back on its wheels, good old T45 tube  Then again, he only had 320hp, so we'll probably be going a bit quicker... Makes the panels a mess though! |
|
| Author: | PhillipM [ Tue Feb 15, 2011 5:18 pm ] |
| Post subject: | Re: For when the buggy just isn't quite mad enough... |
|
|
| Author: | Odyknuck [ Tue Feb 15, 2011 5:31 pm ] |
| Post subject: | Re: For when the buggy just isn't quite mad enough... |
What is that just a teaser Phillip? |
|
| Author: | PhillipM [ Tue Feb 15, 2011 6:30 pm ] |
| Post subject: | Re: For when the buggy just isn't quite mad enough... |
Made it a clicky so you can see the whole picture 
|
|
| Author: | Andrew_Ha [ Tue Feb 15, 2011 8:21 pm ] |
| Post subject: | Re: For when the buggy just isn't quite mad enough... |
That thing is bad ass |
|
| Author: | ImmortalSoul219 [ Tue Feb 15, 2011 8:35 pm ] |
| Post subject: | Re: For when the buggy just isn't quite mad enough... |
Id like to hear a vid of this thing running and driving! |
|
| Author: | PhillipM [ Tue Feb 15, 2011 8:50 pm ] |
| Post subject: | Re: For when the buggy just isn't quite mad enough... |
I'll get some video of it running up tommorow if possible. |
|
| Author: | ImmortalSoul219 [ Tue Feb 15, 2011 8:56 pm ] |
| Post subject: | Re: For when the buggy just isn't quite mad enough... |
Sweet! Thanks |
|
| Author: | PhillipM [ Thu Feb 17, 2011 10:56 am ] |
| Post subject: | Re: For when the buggy just isn't quite mad enough... |
Yer out of luck, the bloody video file's corrupt  I'll sort some out at some point. |
|
| Author: | ImmortalSoul219 [ Fri Feb 18, 2011 6:33 pm ] |
| Post subject: | Re: For when the buggy just isn't quite mad enough... |
Damn! |
|
| Author: | PhillipM [ Thu Mar 17, 2011 5:25 pm ] |
| Post subject: | Re: For when the buggy just isn't quite mad enough... |
Yes, the damping's set far too hard, and the car's too high - keeping the bodywork off the floor whilst he gets used to the car: http://www.youtube.com/watch?v=wPlBtUVdfRE |
|
| Author: | ImmortalSoul219 [ Thu Mar 17, 2011 7:44 pm ] |
| Post subject: | Re: For when the buggy just isn't quite mad enough... |
A VID! Thats SWEET! |
|
| Author: | nitro_mudder [ Sat Mar 19, 2011 11:42 am ] |
| Post subject: | Re: For when the buggy just isn't quite mad enough... |
Looks a bit stiff, but one hell of a start! Lovin it. |
|
| Author: | passat2800 [ Thu Mar 24, 2011 11:50 pm ] |
| Post subject: | Re: For when the buggy just isn't quite mad enough... |
So what is the power plant and trans? Please say 2000 and up Passat. Dodge Viper?
|
|
| Author: | PhillipM [ Wed Dec 28, 2011 9:48 am ] |
| Post subject: | Re: For when the buggy just isn't quite mad enough... |
Missed this, it's the 5L BMW V10 motor, transmission is a Sadev sequential gearbox driving two billet diff made by yours truly.
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|