WoodsBuggy.com
http://www.woodsbuggy.com/phpBB3/

Misc. parts for sale
http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=7&t=9426
Page 1 of 1

Author:  streetstock174 [ Fri May 07, 2010 1:41 pm ]
Post subject:  Misc. parts for sale

Got several misc. parts.

Have a complete rear suspension setup, consisting of a 1600 single port engine that runs great, a sedan transmission, 2 axles with cv joints, stock arms with the beefup kit installed. The motor is missing tins, and distributor, valve covers, and coil but is otherwise complete down to the stinger. $500

Rack and pinion, complete $75

Set of 15x8 aero racing rims (2 inch offset, 4 3/4 pattern) that are pratically new with 31" buckshot tires that have been half cut. Tires are probably about 1/2 tread still. $250

Set of 15x10 aero racing rims (2 inch offset, 4 3/4 pattern) that are also practically new. No tires with these as they are my street tires and gonna keep 'em. $80

1600 dual port motor, needs to be gone through. Not locked up but is tight. It is complete though. $100

3 rib transmission, is a 002, unknown condition. Does go into all the gears. $150

Sedan swingaxle transmission, complete to the drums but no nosecone. No problems when pulled out. $75

15x9 wide 5 vw rims $50 obo
15x4 wide 5 vw rims $50 obo Worn out 3 ribs tires are free. :D

Author:  oddpowers [ Fri May 07, 2010 4:14 pm ]
Post subject:  Re: Misc. parts for sale

How close are you to Cooksvile/Algood Tn? I am interested in the 1600 DP.
Just tring to figure out how to get it here. My folks live in Algood.

Author:  streetstock174 [ Sat May 08, 2010 2:43 am ]
Post subject:  Re: Misc. parts for sale

oddpowers wrote:
How close are you to Cooksvile/Algood Tn? I am interested in the 1600 DP.
Just tring to figure out how to get it here. My folks live in Algood.


Mapquest says about 2 hrs.

Author:  COOTERGUY [ Sun May 09, 2010 11:06 am ]
Post subject:  Re: Misc. parts for sale

Got a pic of the rack and pinion setup? What brand is it

Author:  oddpowers [ Tue May 25, 2010 2:47 pm ]
Post subject:  Re: Misc. parts for sale

Are you going to wellsville Memorial Day? If so I will buy the 1600 dp.

Author:  streetstock174 [ Sat Jul 31, 2010 5:19 pm ]
Post subject:  Re: Misc. parts for sale

Stuff is still for sale, haven't been on much lately. Will sell the 1600 sp seperately for $300 and the reinforced arms for $75 with the polyurethane bushings. I do have pictures of most of this stuff, if ya are interested, pm me and I'll send pics of whichever piece your interested in.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/