Got several misc. parts.

Have a complete rear suspension setup, consisting of a 1600 single port engine that runs great, a sedan transmission, 2 axles with cv joints, stock arms with the beefup kit installed. The motor is missing tins, and distributor, valve covers, and coil but is otherwise complete down to the stinger. $500

Rack and pinion, complete $75

Set of 15x8 aero racing rims (2 inch offset, 4 3/4 pattern) that are pratically new with 31" buckshot tires that have been half cut. Tires are probably about 1/2 tread still. $250

Set of 15x10 aero racing rims (2 inch offset, 4 3/4 pattern) that are also practically new. No tires with these as they are my street tires and gonna keep 'em. $80

1600 dual port motor, needs to be gone through. Not locked up but is tight. It is complete though. $100

3 rib transmission, is a 002, unknown condition. Does go into all the gears. $150

Sedan swingaxle transmission, complete to the drums but no nosecone. No problems when pulled out. $75

15x9 wide 5 vw rims $50 obo
15x4 wide 5 vw rims $50 obo Worn out 3 ribs tires are free.

How close are you to Cooksvile/Algood Tn? I am interested in the 1600 DP.
Just tring to figure out how to get it here. My folks live in Algood.

Mapquest says about 2 hrs.

Got a pic of the rack and pinion setup? What brand is it

Are you going to wellsville Memorial Day? If so I will buy the 1600 dp.

Stuff is still for sale, haven't been on much lately. Will sell the 1600 sp seperately for $300 and the reinforced arms for $75 with the polyurethane bushings. I do have pictures of most of this stuff, if ya are interested, pm me and I'll send pics of whichever piece your interested in.