I have a stock pressure plate and 6 puck disk. The 1700 plate has about 2 miles on it and the puck clutch was installed but never run. $100 bucks for the pair plus shipping.

Is it a stock pressure plate or 1700#?
What brand?

Thanks

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page

Its an Empi and im pretty sure its a 1700lb. What is a stock one 1600?

I don't think stock is near that.
More like 1100-1200.

What is the EMPI part number?
And the part number of the disc if you have it too.

Thanks

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page

I looked all over the puck disk and i never found any #'s and the only number i found on the plate was 4020 and the last number had been stamped twice with a 2. So it might be a 4022..

do u still have puck dics and plate

_________________
sit down!!!!! hold on!!!! and scream!! cuz we're going
1915 counter cRank, mofoco 042 maule 94's vz15 and 5 rib built to the max!!!

Yes i still have the plate and disk..