| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| 1700lb P-Plate and 6 Puck Disk PLEASE DELETE! http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=7&t=8194 |
Page 1 of 1 |
| Author: | Bdavis2004 [ Tue Dec 01, 2009 12:30 pm ] |
| Post subject: | 1700lb P-Plate and 6 Puck Disk PLEASE DELETE! |
I have a stock pressure plate and 6 puck disk. The 1700 plate has about 2 miles on it and the puck clutch was installed but never run. $100 bucks for the pair plus shipping. |
|
| Author: | turboblue [ Tue Dec 01, 2009 1:13 pm ] |
| Post subject: | Re: 1700lb P-Plate and 6 Puck Disk |
Bdavis2004 wrote: I have a stock pressure plate and 6 puck disk. The 1700 plate has about 2 miles on it and the puck clutch was installed but never run. $100 bucks for the pair plus shipping. Is it a stock pressure plate or 1700#? What brand? Thanks |
|
| Author: | Bdavis2004 [ Tue Dec 01, 2009 3:39 pm ] |
| Post subject: | Re: 1700lb P-Plate and 6 Puck Disk |
Its an Empi and im pretty sure its a 1700lb. What is a stock one 1600? |
|
| Author: | turboblue [ Tue Dec 01, 2009 7:29 pm ] |
| Post subject: | Re: 1700lb P-Plate and 6 Puck Disk |
Bdavis2004 wrote: Its an Empi and im pretty sure its a 1700lb. What is a stock one 1600? I don't think stock is near that. More like 1100-1200. What is the EMPI part number? And the part number of the disc if you have it too. Thanks |
|
| Author: | Bdavis2004 [ Mon Dec 07, 2009 6:09 pm ] |
| Post subject: | Re: 1700lb P-Plate and 6 Puck Disk |
I looked all over the puck disk and i never found any #'s and the only number i found on the plate was 4020 and the last number had been stamped twice with a 2. So it might be a 4022.. |
|
| Author: | jackson.ryan29 [ Tue Mar 09, 2010 10:04 pm ] |
| Post subject: | Re: 1700lb P-Plate and 6 Puck Disk |
Bdavis2004 wrote: I looked all over the puck disk and i never found any #'s and the only number i found on the plate was 4020 and the last number had been stamped twice with a 2. So it might be a 4022.. do u still have puck dics and plate |
|
| Author: | Bdavis2004 [ Wed Mar 24, 2010 5:22 pm ] |
| Post subject: | Re: 1700lb P-Plate and 6 Puck Disk |
Yes i still have the plate and disk.. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|