Still looking
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| WTB http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=7&t=7381 |
Page 1 of 1 |
| Author: | turboblue [ Mon Aug 10, 2009 3:53 pm ] |
| Post subject: | WTB |
Looking for a pair of late model ball joint raised spindles. Somewhere around 2 or 2-1/2". Let me know what you have and how much shipped to 46161. Thanks |
|
| Author: | afterburnt [ Mon Aug 10, 2009 9:23 pm ] |
| Post subject: | Re: WTB |
try making your own, a long time ago, i found this on, blindchickenracing, and it worked pretty good, http://www.blindchickenracing.com/How_t ... indles.htm dave |
|
| Author: | turboblue [ Tue Aug 11, 2009 10:40 am ] |
| Post subject: | Re: WTB |
afterburnt wrote: try making your own, a long time ago, i found this on, blindchickenracing, and it worked pretty good, http://www.blindchickenracing.com/How_t ... indles.htm dave Yeah I've done that before. These are for a customer and I'll pass this link on to him. Thanks |
|
| Author: | turboblue [ Tue Aug 18, 2009 11:41 am ] |
| Post subject: | Re: WTB |
Still looking |
|
| Author: | MadMike [ Tue Aug 18, 2009 7:24 pm ] |
| Post subject: | Re: WTB |
Gary if you got the parts, I'll make them for you. |
|
| Author: | turboblue [ Wed Aug 19, 2009 10:40 am ] |
| Post subject: | Re: WTB |
MadMike wrote: Gary if you got the parts, I'll make them for you. They are for a customer Mike. All I have for spindles are new ones. You have any? Thanks |
|
| Author: | MadMike [ Wed Aug 19, 2009 8:21 pm ] |
| Post subject: | Re: WTB |
I don't have any ball joint anything here. |
|
| Author: | buggyb [ Thu Aug 20, 2009 12:10 pm ] |
| Post subject: | Re: WTB |
how about a set of thing spindles |
|
| Author: | turboblue [ Thu Aug 20, 2009 12:56 pm ] |
| Post subject: | Re: WTB |
buggyb wrote: how about a set of thing spindles Those will work as long as you have the trailing arms to match. I've seen that stuff bring $250............... 
|
|
| Author: | buggyb [ Thu Aug 20, 2009 1:55 pm ] |
| Post subject: | Re: WTB |
you can use bj arms and bj upper joint and use a thing lower joint because the pin is larger i have been doing it for years you have to grind the flange off where the bj used to sit into and press the thing joint in works perfect never had a problem. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|