Looking for a pair of late model ball joint raised spindles.
Somewhere around 2 or 2-1/2".
Let me know what you have and how much shipped to 46161.

Thanks

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page

try making your own, a long time ago, i found this on, blindchickenracing, and it worked pretty good,
http://www.blindchickenracing.com/How_t ... indles.htm
dave

Yeah I've done that before.
These are for a customer and I'll pass this link on to him.

Thanks

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page

Still looking

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page

Gary if you got the parts, I'll make them for you.

_________________
Of all the things I've lost, I miss my mind the most.
M
A
G
A

They are for a customer Mike.

All I have for spindles are new ones.
You have any?

Thanks

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page

I don't have any ball joint anything here.

_________________
Of all the things I've lost, I miss my mind the most.
M
A
G
A

how about a set of thing spindles

Those will work as long as you have the trailing arms to match.

I've seen that stuff bring $250...............

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page

you can use bj arms and bj upper joint and use a thing lower joint because the pin is larger i have been doing it for years you have to grind the flange off where the bj used to sit into and press the thing joint in works perfect never had a problem.