Well I hate to do this but fate is forcing my hand. Me and the old lady are not getting along very well and I feel it's time to move on. So I need to start selling off my toys, tools and I guess my soul to start over. I will update the add with photo's and more items as I dig them out and get photo's so this may take a few days to get it all on here.

First thing is a Chain Drive Frame with auto tranny $1000 Jig built not just knocked togrther, Join the Chain Gang.











Propane Carb KIt or Kits these are the top of the line Modified 450 M&M's not Impco's. There is 2 kits or use together for one big motor how I was going to use them. Each kit can run as big as a small V8 or as small as a stock 1600 VW and every thing in between (5.0 V8 or turbo V6 max on one carb) Runs like fuel injection no more fouled plugs or spitting and spurting of weber/del's.

Cost me $1490 will sale $400 each kit or $750 for the whole lot. Sold







Bus hauler Project 88 Ford BlueBird It's even been titled as a MobleHome at 10,000 lB's so No CDL is needed. Has very low miles starts right up even after sitting a long time Has new A1 virgin tires all the way around and new battery. Has all the power one could ack for a hauler and gets fair MPG @16 it's not air ride. I was going to add a tall gear rear axle with air ride out or a semi to make it get even better MPG because it will only go 70MPH, but that my be in the computer or fuel block.

$1500 The new tires cost more then I'm asking for the whole bus.






Pipe bender, stand and Degree Ring Kit It's a Model 3 Bender
from JD Squared Inc http://www.jd2.com/m3b.htm

I'll take $300 this all together sale's for over $500 new + shipping Sold

_________________
A bad day Buggying is better then a good day of most anything else.

Let me know if the bender does not sale. I assumme the die comes with it?

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!

Yes a 1 1/2 tubing die does come with it. I will put you next in line if the deal don't go down

_________________
A bad day Buggying is better then a good day of most anything else.

Does the bus have a cummins or brazilian 6.6?

_________________
"YOU CAN MAKE THINGS HAPPEN, WATCH THINGS HAPPEN OR WONDER WHAT THE F$$K HAPPEND...WE'RE MAKING THINGS HAPPEN" The strong words of Captain Phil! Rest in peice!

It has a 6.6 turbo Diesel HFM06.6EAA7-DI

I don't think it's a Cummins and don't know about the brazilian part but pretty sure it's a ford engine.

_________________
A bad day Buggying is better then a good day of most anything else.

The best way to tell is the valve cover, is there one long or 6 little?

_________________
"YOU CAN MAKE THINGS HAPPEN, WATCH THINGS HAPPEN OR WONDER WHAT THE F$$K HAPPEND...WE'RE MAKING THINGS HAPPEN" The strong words of Captain Phil! Rest in peice!

Put me in next on the list for the bender please

_________________
Dodge 2.2L Turbo Power Running Megasquirt-n-Spark MPI.
http://www.woodsbuggy.com/forum/water-cooled-engines/3584?p=24592#p24592

your up 3rd in line

_________________
A bad day Buggying is better then a good day of most anything else.

well put me in 4th in line

It's one long one but I will get a photo or 2 and post them for ya but I'm pretty sure it's not a Cummins

_________________
A bad day Buggying is better then a good day of most anything else.

Your there but I just talked to the guy and we have plans to get together early tomorrow.

_________________
A bad day Buggying is better then a good day of most anything else.

Ok here are the photo's it has FORD on the valve cover and on the sticker on the valve cover.

Here are better photos http://img35.imageshack.us/gal.php?g=1001876s.jpg

_________________
A bad day Buggying is better then a good day of most anything else.

Bender sold to longtravel I hope you get alot of use out of it. It was nice meeting you and your dad hope to see you on the trail sometime when I get my life back on order.

_________________
A bad day Buggying is better then a good day of most anything else.

Damn dude, sorry to hear all that. Hope you get everything back in order ASAP.

And for anyone interested, I've seen that chaindrive frame in person and it looks great. The pictures don't do it justice! Would be a freakin' awesome project for someone.

Bump for a good seller and a good guy.

_________________
Get me that hammer, pronto!

Yea I hate it too, I'm sure I'll get back into buggy's it to much a part of life at this point. How id your buggy coming along.

Tony

_________________
A bad day Buggying is better then a good day of most anything else.

Well I should hope so!
It's almost ready to go. Just need to run brake lines pretty much. Just got done replacing the headgaskets on the engine because it was spraying water out of one of the exhaust pipes (I guess I found the one problem that w/c engines can have that a/c engines can't, lol).

_________________
Get me that hammer, pronto!