WoodsBuggy.com
http://www.woodsbuggy.com/phpBB3/

091 6 Rib
http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=7&t=6691		 Page 1 of 2
Author:  turboblue [ Wed May 27, 2009 4:41 pm ]
Post subject:  091 6 Rib
091 6 rib transmission.
Straight out of the bus, never been in a buggy.

Image

$550 OBO
Local pickup only or you arrange for shipping
Author:  gasman [ Wed May 27, 2009 5:11 pm ]
Post subject:  Re: 091 6 Rib
bet it came out of a red bus.chad :mrgreen:
Author:  turboblue [ Wed May 27, 2009 5:33 pm ]
Post subject:  Re: 091 6 Rib
gasman wrote:
bet it came out of a red bus.chad :mrgreen:



That would be correct sir....... 8)
Actually there was something laying on it that got painted red.
You buy it and I'll get out the paint stripper.......... :mrgreen:
Author:  gasman [ Wed May 27, 2009 5:35 pm ]
Post subject:  Re: 091 6 Rib
lol. :mrgreen: chad
Author:  nitro_mudder [ Wed May 27, 2009 7:13 pm ]
Post subject:  Re: 091 6 Rib
I want it, has matching overspray to my 6 rib. Can't yet, to many other mods b4 spares. :(
Author:  bradley59dzl [ Thu May 28, 2009 12:34 pm ]
Post subject:  Re: 091 6 Rib
how much shipped to 16120 thanks brad
Author:  turboblue [ Thu May 28, 2009 12:47 pm ]
Post subject:  Re: 091 6 Rib
bradley59dzl wrote:
how much shipped to 16120 thanks brad



Going by UPS and the weight it's gonna be nearly $90 shipping.

I don't have a suitable box for it though.
Rather sell it locally if possible...........
Author:  bradley59dzl [ Thu May 28, 2009 2:33 pm ]
Post subject:  Re: 091 6 Rib
turboblue wrote:
bradley59dzl wrote:
how much shipped to 16120 thanks brad



Going by UPS and the weight it's gonna be nearly $90 shipping.

I don't have a suitable box for it though.
Rather sell it locally if possible...........

thats not a prob if ya dont find a buyer an like to get rid of it let me no, thanks brads
Author:  turboblue [ Thu May 28, 2009 2:37 pm ]
Post subject:  Re: 091 6 Rib
bradley59dzl wrote:
turboblue wrote:
bradley59dzl wrote:
how much shipped to 16120 thanks brad



Going by UPS and the weight it's gonna be nearly $90 shipping.

I don't have a suitable box for it though.
Rather sell it locally if possible...........

thats not a prob if ya dont find a buyer an like to get rid of it let me no, thanks brads



OK, actually I have another coming in Saturday.
I'll see what it takes to box one up.
UPS don't like crates........ :?
Author:  Kyle [ Thu May 28, 2009 3:36 pm ]
Post subject:  Re: 091 6 Rib
Gary....walmart 8.00 plastic tub and tape the lid shut. They have no problem with that.
Author:  Stevo [ Thu May 28, 2009 4:51 pm ]
Post subject:  Re: 091 6 Rib
Put it in a plastic bag then in a box, Take a can expanding foam insulation and fill the box around the trans. It works.
Author:  turboblue [ Fri May 29, 2009 11:15 am ]
Post subject:  Re: 091 6 Rib
Kyle wrote:
Gary....walmart 8.00 plastic tub and tape the lid shut. They have no problem with that.


SubySteve wrote:
Put it in a plastic bag the n in a box, Take a can expanding foam insulation and fill the box around the trans. It works.



You guys are just too slick......... :mrgreen:
Author:  MickeyMouse [ Thu Jun 11, 2009 8:55 pm ]
Post subject:  Re: 091 6 Rib
do you still have the six rib tranny?
Author:  turboblue [ Fri Jun 12, 2009 1:08 pm ]
Post subject:  Re: 091 6 Rib
MickeyMouse wrote:
do you still have the six rib tranny?


Actually have two at the moment Dan, and a 3 rib.
Author:  nitro_mudder [ Sat Jun 13, 2009 6:16 pm ]
Post subject:  Re: 091 6 Rib
Gary, still $550?
Author:  turboblue [ Mon Jun 15, 2009 11:37 am ]
Post subject:  Re: 091 6 Rib
nitro_mudder wrote:
Gary, still $550?



$500 choice.
Time for them to go!
Author:  MickeyMouse [ Mon Jun 15, 2009 1:23 pm ]
Post subject:  Re: 091 6 Rib
I wish I had a way to get one to GA. Too expensive to ship. Anyone from IN heading south in the near future..
Author:  turboblue [ Wed Jun 17, 2009 4:16 pm ]
Post subject:  Re: 091 6 Rib
Down to one now.
Author:  rifleman [ Mon Jun 22, 2009 6:49 pm ]
Post subject:  Re: 091 6 Rib
I'm thinking about it for my type 1 engine - I just need to get a different bell housing right? How much do those run?
Author:  Andrew_Ha [ Mon Jun 22, 2009 7:10 pm ]
Post subject:  Re: 091 6 Rib
just need longer studs in engine bolt pattern the same
Author:  turboblue [ Tue Jun 23, 2009 12:37 pm ]
Post subject:  Re: 091 6 Rib
rifleman wrote:
I'm thinking about it for my type 1 engine - I just need to get a different bell housing right? How much do those run?



A bit longer studs as mentioned and a 6 rib starter.
Author:  MickeyMouse [ Tue Jun 23, 2009 1:47 pm ]
Post subject:  Re: 091 6 Rib
turboblue wrote:
rifleman wrote:
I'm thinking about it for my type 1 engine - I just need to get a different bell housing right? How much do those run?



A bit longer studs as mentioned and a 6 rib starter.


And a different adapter plate for the nose cone and rear mounts.
Author:  bruce 1 [ Thu Jun 25, 2009 5:46 pm ]
Post subject:  Re: 091 6 Rib
MickeyMouse wrote:
I wish I had a way to get one to GA. Too expensive to ship. Anyone from IN heading south in the near future..



If you can get Turbo to get it to D&K or Chuck Jones in London Ky. I can get it to Ga for you for FREE.
Author:  turboblue [ Thu Jul 09, 2009 1:04 pm ]
Post subject:  Re: 091 6 Rib
My folks are attending a reunion at Boonesborough State Park outside of Richmond Ky Saturday July 11th.
I can get it that far if anyone is interested in it.

Thanks
Author:  bruce 1 [ Thu Jul 09, 2009 2:00 pm ]
Post subject:  Re: 091 6 Rib
turboblue wrote:
My folks are attending a reunion at Boonesborough State Park outside of Richmond Ky Saturday July 11th.
I can get it that far if anyone is interested in it.

Thanks



There you go Mickey. I would say Turbo would get it to Chuck in London. Or better yet he could take it to Southern buggys in London. You could come to D&K for the Drew meet and greet viewtopic.php?f=13&t=6891 thing and get it then.
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/