| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| subaru harness http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=7&t=6291 |
Page 1 of 1 |
| Author: | volksdude2007 [ Wed Apr 08, 2009 6:07 pm ] |
| Post subject: | subaru harness |
im looking for a subaru harness for a decent price i do not feel like messing with this thing im not anywhere close to a electrician if you have one that is ready to go with all the extras cut out let me know the price thanks i have the computer just need the wiring its a 94 2.2 im thinking obd 1 but not 100% on that Roy |
|
| Author: | Firebug [ Wed Apr 08, 2009 6:14 pm ] |
| Post subject: | Re: subaru harness |
How big a hurry are you? Can you get the harness from the donor car? If you can get it I can do the harness for you,,,or you can send it to enginewirning.com ,,or numbchux of this site if you can get in touch with him. I have a harness but I won't to keep it with the engine ,,which I may sell, but am in no hurry to sell.. Also the harness on mine is from a 92 but on a 94 engine. the harness changed a little for 92 to 94 but if you swap the motor harness with the intake manifold and injectors it works as intended,,,good luck |
|
| Author: | volksdude2007 [ Wed Apr 08, 2009 6:36 pm ] |
| Post subject: | Re: subaru harness |
ya its something i would like to have done before memorial day but dont have a whole lot of cash at all to work with i have 2 motors one is a 92 and the one in the buggy is a 94 any help from anyone would be greatly appriciated time is ticking down for memorial day |
|
| Author: | Stevo [ Wed Apr 08, 2009 8:27 pm ] |
| Post subject: | Re: subaru harness |
The major diiference from 92 to 94 is the plugs that go to the motor. The early ones had three the later two. |
|
| Author: | Firebug [ Wed Apr 08, 2009 8:38 pm ] |
| Post subject: | Re: subaru harness |
SubySteve wrote: The major diiference from 92 to 94 is the plugs that go to the motor. The early ones had three the later two. right,,,I had that issue with my last 2.2 engine . I swapped the intake including injectors and motor harness and it was fine. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|