The step file (.stp) for CNC machining is available via email.
Here is your basic drawing. You can take this drawing to any job shop or I can make them for you.
http://tinypic.com/view.php?pic=2128vly&s=5
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| Needed http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=7&t=5457 |
Page 1 of 1 |
| Author: | nickschlemer [ Tue Dec 30, 2008 10:31 pm ] |
| Post subject: | Needed |
Hey Guys, Where can i get a reservior or pipe clamp that goes for 1.5" to 1.5" having a hard time finding this size.. |
|
| Author: | bradley59dzl [ Tue Dec 30, 2008 11:25 pm ] |
| Post subject: | Re: Needed |
for???? like for puttin to pieces together that are 1.5? if so fernoc adapters for pvc pipe...if thats what u need? |
|
| Author: | kendel [ Tue Dec 30, 2008 11:28 pm ] |
| Post subject: | Re: Needed |
http://www.discounthydraulichose.com/He ... parent.htm this it? |
|
| Author: | nickschlemer [ Wed Dec 31, 2008 1:00 pm ] |
| Post subject: | Re: Needed |
NO sorry i didnt explain it very good. Like reservoir clamps.. like this but 1.5 x 1.5 http://www.mooreparts.com/store/product ... 1.5-X-2.5/ |
|
| Author: | nickschlemer [ Wed Dec 31, 2008 11:02 pm ] |
| Post subject: | Re: Needed |
anyone?? |
|
| Author: | jim [ Thu Jan 01, 2009 9:12 am ] |
| Post subject: | Re: Needed |
I can make these on my CNC milling machine. I will post a drawing for you to review. |
|
| Author: | nickschlemer [ Thu Jan 01, 2009 12:57 pm ] |
| Post subject: | Re: Needed |
That sounds cool. appreciate it.. |
|
| Author: | kendel [ Fri Jan 02, 2009 12:05 am ] |
| Post subject: | Re: Needed |
Mckenzies made the weld on tab, brackets, mount thingies I used for my resiviours |
|
| Author: | nickschlemer [ Fri Jan 02, 2009 6:51 am ] |
| Post subject: | Re: Needed |
Yeah i will go with those if i cannot find these. There actually for my fuel pump.. |
|
| Author: | jim [ Fri Jan 02, 2009 8:36 pm ] |
| Post subject: | Re: Needed |
The step file (.stp) for CNC machining is available via email. Here is your basic drawing. You can take this drawing to any job shop or I can make them for you. http://tinypic.com/view.php?pic=2128vly&s=5
|
|
| Author: | WellsvilleMike [ Wed Jan 07, 2009 11:06 pm ] |
| Post subject: | Re: Needed |
Try The Chassis Shop (chassisshop.com) They have some cool polished billet clamps that are mix and match. You buy two 2" pieces to make one 2x2 clamp. |
|
| Author: | WellsvilleMike [ Wed Jan 07, 2009 11:19 pm ] |
| Post subject: | Re: Needed |
Page 37 of their catalog. Two of part number C72-310 will get you an awesome clamp. |
|
| Author: | jim [ Thu Jan 08, 2009 6:35 am ] |
| Post subject: | Re: Needed |
WellsvilleMike wrote: Page 37 of their catalog. Two of part number C72-310 will get you an awesome clamp. http://secure.chassisshop.com/partdetail/C72-310/ |
|
| Author: | Odyknuck [ Thu Jan 08, 2009 9:58 am ] |
| Post subject: | Re: Needed |
Nick, try here: http://cgi.ebay.com/ebaymotors/2-Reserv ... ccessories They offer different styles and diameter combinations, they may have what you need. |
|
| Author: | fortydegnorth [ Thu Jan 08, 2009 11:32 am ] |
| Post subject: | Re: Needed |
What if you just weld a small plate to the frame with two holes drilled in it and use this style of mounting. Cheap and easy: http://store.summitracing.com/partdetai ... toview=sku |
|
| Author: | Odyknuck [ Thu Jan 08, 2009 4:24 pm ] |
| Post subject: | Re: Needed |
fortydegnorth wrote: What if you just weld a small plate to the frame with two holes drilled in it and use this style of mounting. Cheap and easy: http://store.summitracing.com/partdetai ... toview=sku Yea, That works however there is just something about Billet clamps that really class it up. Every time I look at the band clamps that came with and are on my Fox shocks Resivoirs I wanna change them out to Billet. Also if his frame is allready Painted or power coated hes better of with a 2 hole frame clamp. |
|
| Author: | hillaholic [ Sat Jan 31, 2009 10:53 pm ] |
| Post subject: | Re: Needed |
I found some for $30 http://www.oregonmotorsports2000.com/se ... let/Detail  or these for $33.75  http://www.irvansmith.com/scart/penske- ... -2090.html |
|
| Author: | nickschlemer [ Sun Feb 01, 2009 2:19 am ] |
| Post subject: | Re: Needed |
hillaholic wrote: I found some for $30 http://www.oregonmotorsports2000.com/se ... let/Detail or these for $33.75 http://www.irvansmith.com/scart/penske- ... -2090.html Thanks thats what i need.. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|