| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| Rear Trailing Arms http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=7&t=3957 |
Page 1 of 1 |
| Author: | D. Marks [ Sat May 31, 2008 5:07 pm ] |
| Post subject: | Rear Trailing Arms |
Brand new set of 3x2 or 3x3 arms with VW bearing carriers. $250.00 Shipping included. 419-618-1307 |
|
| Author: | travisdunebuggy [ Fri Jun 20, 2008 11:57 pm ] |
| Post subject: | Re: Rear Trailing Arms |
Hey dean i was just wandering if you made trailn arms up to 6x6???? and if you do what am i lookn at just for the arms$$$$$$$?? thanks |
|
| Author: | cheapthrill [ Fri Jun 27, 2008 11:14 pm ] |
| Post subject: | Re: Rear Trailing Arms |
do you have any pics of the 2x3s on a buggy? a friend of mine bought a set at the lansing show from some one else and the rear wheels sit toed in like a swing axle, i would like mine to sit flat cause i ride the road to get to the trails |
|
| Author: | D. Marks [ Sat Jun 28, 2008 8:26 am ] |
| Post subject: | Re: Rear Trailing Arms |
If you scroll down to the bottom of this link you will see a pic of Kyles bugy from behind. He used my arms on his new buggy. viewtopic.php?f=23&t=3617&st=0&sk=t&sd=a&start=60 |
|
| Author: | Kyle [ Sun Jun 29, 2008 4:35 pm ] |
| Post subject: | Re: Rear Trailing Arms |
best arms around. if you would have seen the hit they took this weekend at wellsville you'd be amazed trust me haha. |
|
| Author: | wildcatoffroad9606 [ Tue Jul 01, 2008 10:49 pm ] |
| Post subject: | Re: Rear Trailing Arms |
What axles would you use with either. I am getting ready to start a new frame. I beleive I would prefer the 2x3s. I have a set of stock bus axles and a set of axles out of a later model vanagon. Right now I am running factory arms that have been lenghtened 2" with car axles and bus cv's. Thanks Wildcat |
|
| Author: | Kyle [ Tue Jul 01, 2008 11:16 pm ] |
| Post subject: | Re: Rear Trailing Arms |
stock bus axles for 2x3's. 18 3/4 |
|
| Author: | wildcatoffroad9606 [ Wed Jul 02, 2008 2:12 pm ] |
| Post subject: | Re: Rear Trailing Arms |
appreciate the info. I will be going that route. thanks Wildcat |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|