WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
2.2 Ecotec stand alone wire harness and computer http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=7&t=17675 |
Page 1 of 1 |
Author: | Jeremy1 [ Sun Feb 22, 2015 9:47 pm ] |
Post subject: | 2.2 Ecotec stand alone wire harness and computer |
This is a factor harness that has been trimmed down and all unnecessary plugs and wiring removed. Harness will fit earlier Ecotec 01 to 05 with a single coil pack and a cable driven throttle body. A flash done with hp tuners that removes all the Trans and emissions codes. Harness comes with fan and fuel pump relays also a obd2 port for checking codes. Five wire hook up. 350.00 shipped 330 442 5166 Sent from my iPhone using Tapatalk |
Author: | 720boy [ Sun Feb 22, 2015 10:16 pm ] |
Post subject: | Re: 2.2 Ecotec stand alone wire harness and computer |
what year is it for |
Author: | Jeremy1 [ Sun Feb 22, 2015 10:47 pm ] |
Post subject: | Re: 2.2 Ecotec stand alone wire harness and computer |
It will fit earlier Ecotec 01 to 05. As long as it has a single coil pack on top of engine and a cable driven throttle body Sent from my iPhone using Tapatalk |
Author: | Jeremy1 [ Thu Feb 04, 2016 5:40 pm ] |
Post subject: | Re: 2.2 Ecotec stand alone wire harness and computer |
Update have a few of these harness left. 350 shipped . Can also trim down and flash your harness and ECM for 250 |
Author: | Jeremy1 [ Mon Sep 25, 2017 8:38 pm ] |
Post subject: | Re: 2.2 Ecotec stand alone wire harness and computer |
Ttt still do these all the time. Also can do other makes and models. Text or call 3304425166 |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |