As above, need to be 30 inches from circlip to circlip, anyone got any or know a supplier that will ship over the pond?

http://www.mooreparts.com/4906-RBP-930300-30/


Posted using the WoodsBuggy Mobile App

Will they ship over here? Can't see international shipping mentioned anywhere.

I think my first link is wrong, it's for 30" end to end not clip to clip

I believe this is what your looking for and they ship to UK http://www.pacificcustoms.com/mm5/merch ... 300m-axles


Posted using the WoodsBuggy Mobile App

Great, thanks, I can get some made over here from a friend but his company only works with maraging steels, and S162 axles are serious money!

Can't beat that exchange rate too!


Posted using the WoodsBuggy Mobile App

It's nice until HMRC get hold of the package when it comes through sorting, then slap a shitload of tax on

I have 2 pair in the barn from a project years ago. But they are as follows: 1ea.( 29" full length), 1ea.(29 with 1 inch cut off one side) . The other pair of 29's have been cut down on both sides leaving a 25.5" shaft ea.. They are all Swayaway w/930 splines.

Thanks, but I need 30's otherwise they're too short at full travel.

i got my 29" 300m axles from kartek. they will ship to you. expect to pay $5-600 for them!
http://www.kartek.com/
30-1/4" $649.00

_________________
Maybe you should chug on over to mamby pamby land....

CUT AN OLD 930 JOINT IN 1/2 AND USE IT FOR A SPACER.BACK WHEN I HAD NEARLY 8FT OF WIDTH MY FRAME WOULD WANT TO GO LT AND RT AS I SLIPPED AND GRIPPED AND 1 WHEEL ALWAYS HAD TO GO IN THE GRASS.