| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| Mike's Machine & Fabrication For Sale List http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=7&t=15970 |
Page 2 of 4 |
| Author: | MadMike [ Fri Jan 10, 2014 12:14 pm ] |
| Post subject: | Re: Mike's Machine & Fabrication For Sale List |
The arms do not come with bearings or seals. I can provide them at an additional cost. As far as what material I used, right after you buy a set, I'll let you drill a hole into them to find out. Now, how thick do YOU think they are to survive this, not once, not twice........ https://www.youtube.com/watch?v=gYIXHrH ... ata_player |
|
| Author: | FOX SHOX [ Sat Jan 18, 2014 4:22 pm ] |
| Post subject: | Re: Mike's Machine & Fabrication For Sale List |
[quote="MadMike"]I build everything suspension including front arms and spindles, wheel adapters, beams, torsion eliminators and rear trailing arms. If you need something that is not listed, all it takes is a phone call. 724-650-0816 Wheel adapters. VW 4 bolt to race wide 5 $150  Hey MadMike, do you think a set or 1 of these would work as an adapter for BALANCING tires for the wide 5 rims?. None of the tire shops can do this because of the hole in the middle. Thanks Dave T |
|
| Author: | MadMike [ Sun Jan 19, 2014 7:13 am ] |
| Post subject: | Re: Mike's Machine & Fabrication For Sale List |
I wouldn't trust them for doing balancing. They are just a piece of flat plate. Something like that would need to be specifically made for that use. |
|
| Author: | FOX SHOX [ Sun Jan 19, 2014 9:46 am ] |
| Post subject: | Re: Mike's Machine & Fabrication For Sale List |
Thanks. |
|
| Author: | Hunter71495 [ Sun Jan 19, 2014 9:04 pm ] |
| Post subject: | Re: Mike's Machine & Fabrication For Sale List |
Hey mike can you get a price on a chromoly beam stock width without shock towers, with good king kong adjusters? |
|
| Author: | MadMike [ Mon Jan 20, 2014 4:31 pm ] |
| Post subject: | Re: Mike's Machine & Fabrication For Sale List |
Sorry Hunter, I don't make chromolly beams, they bend too easy and they aren't worth the time to build. I'm also staying away from torsion spring beams, too much involved to make them cheap enough to buy for the average joe. |
|
| Author: | Hunter71495 [ Thu Jan 23, 2014 12:44 am ] |
| Post subject: | Re: Mike's Machine & Fabrication For Sale List |
Just guesstimating, even if you went with your heavy wall with a good set of adjusters or say i supplied my own. Would you be interested at all? Or is it a flat no? |
|
| Author: | newbie26 [ Thu Jan 23, 2014 9:21 am ] |
| Post subject: | Re: Mike's Machine & Fabrication For Sale List |
Where u located mike. I will be interested in some drop spindles in the near future Posted using the WoodsBuggy Mobile App |
|
| Author: | MadMike [ Thu Jan 23, 2014 8:55 pm ] |
| Post subject: | Re: Mike's Machine & Fabrication For Sale List |
Hunter71495 wrote: Just guesstimating, even if you went with your heavy wall with a good set of adjusters or say i supplied my own. Would you be interested at all? Or is it a flat no? There is nothing in the aftermarket that supports what I build, everything is custom made. I would need to make the adjusters in addition to the beam, which takes time which equals $$. I'll build you anything you can afford, and then some. I also would need to come up with a stock beam, which I haven't had in around here in years, to get a starting point for the adjuster angle. I'm NOT saying no, I'm just saying NOT cheap. newbie26 wrote: Where u located mike. I will be interested in some drop spindles in the near future I'm located in the tundra, right next to Nanook's place, you know, somewhere between lost and found. Pittsburgh, "north pole", PA |
|
| Author: | newbie26 [ Thu Jan 23, 2014 9:24 pm ] |
| Post subject: | Re: Mike's Machine & Fabrication For Sale List |
OK mike I'm from st.clairsville Ohio area. So ur not far Posted using the WoodsBuggy Mobile App |
|
| Author: | darrell [ Thu Feb 06, 2014 1:10 pm ] | |||
| Post subject: | Re: Mike's Machine & Fabrication For Sale List | |||
Posted using the WoodsBuggy Mobile App Mike you done a great job on my torsion eliminators I really appreciate it they look great .
|
||||
| Author: | MadMike [ Thu Feb 06, 2014 1:22 pm ] |
| Post subject: | Re: Mike's Machine & Fabrication For Sale List |
I think your car makes them look good, thanks Darrell. |
|
| Author: | MadMike [ Sat May 31, 2014 1:54 pm ] |
| Post subject: | Re: Mike's Machine & Fabrication For Sale List |
Got a fresh batch of torsion eliminators made. |
|
| Author: | Go Big Or Go Home [ Sun Jun 01, 2014 10:43 am ] |
| Post subject: | Re: Mike's Machine & Fabrication For Sale List |
When we quit playing phone tag lol. I will take a set. Bo Sent from my iPhone using Tapatalk |
|
| Author: | MadMike [ Sun Jun 01, 2014 11:00 am ] |
| Post subject: | Re: Mike's Machine & Fabrication For Sale List |
Go Big Or Go Home wrote: When we quit playing phone tag lol. I will take a set. Bo Sent from my iPhone using Tapatalk Timing is everything.  By the way, your it.
|
|
| Author: | MadMike [ Tue Jun 03, 2014 8:07 pm ] |
| Post subject: | Re: Mike's Machine & Fabrication For Sale List |
I have one set of torsion eliminators left, so if you need them, or if you even think you need them now is the time. This will be it for a while, between customer work,the Funco project and the building I'm in the process of buying and everything that goes with that, I"m getting stretched real thin. |
|
| Author: | Go Big Or Go Home [ Thu Jun 05, 2014 1:07 pm ] |
| Post subject: | Re: Mike's Machine & Fabrication For Sale List |
These things look great. Thanks Mike!  Sent from my iPhone using Tapatalk |
|
| Author: | MadMike [ Thu Oct 09, 2014 3:00 pm ] |
| Post subject: | Re: Mike's Machine & Fabrication For Sale List |
Bump |
|
| Author: | MadMike [ Mon Nov 03, 2014 9:21 pm ] |
| Post subject: | Re: Mike's Machine & Fabrication For Sale List |
Anyone do any shooting? I've been making pistol only shooting trees. This is a reactive target set up, hit it on one side it pivots around to the other side. The base of this also has the ADPA target pockets $275 + Shipping 
|
|
| Author: | newbie26 [ Mon Nov 03, 2014 10:53 pm ] |
| Post subject: | Re: Mike's Machine & Fabrication For Sale List |
are the targets made of hardened steel Sent from my iPhone using Tapatalk |
|
| Author: | MadMike [ Tue Nov 04, 2014 12:08 am ] |
| Post subject: | Re: Mike's Machine & Fabrication For Sale List |
No, that's why I said Pistol Only |
|
| Author: | newbie26 [ Tue Nov 04, 2014 10:36 am ] |
| Post subject: | Re: Mike's Machine & Fabrication For Sale List |
Ok. Sent from my iPhone using Tapatalk |
|
| Author: | MadMike [ Thu Nov 20, 2014 6:08 pm ] |
| Post subject: | Re: Mike's Machine & Fabrication For Sale List |
I'm going to have a set of 3X3 rear trailing arms available late next week if anyone is interested. |
|
| Author: | bigDsmith [ Thu Nov 27, 2014 3:12 pm ] |
| Post subject: | Re: Mike's Machine & Fabrication For Sale List |
Hey Mike, much your 3x3's with bearings installed cost? |
|
| Author: | MadMike [ Thu Nov 27, 2014 8:44 pm ] |
| Post subject: | Re: Mike's Machine & Fabrication For Sale List |
I would have to see what bearings cost, but putting bearings in is kinda easy. 500 watt quartz light to warm up the housing for about a half hour, you can put bearings in from the other side of the room. Personally, I would wait till after you weld the shock mounts, caliper brackets and painted and stuff before I put bearings in. I should have those 3X3's ready to ship first part of next week.  And if anyone has type 1 bearing spacers, the tube one in between the bearings, I need them. |
|
| Page 2 of 4 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|