It is currently Thu Mar 28, 2024 3:59 am

Board index » Buy Sell Trade » Parts, Parts & More Parts

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 85 posts ]  Go to page 1, 2, 3, 4  Next
Author Message
PostPosted: Sun Sep 08, 2013 12:31 pm 
Offline
Master fabricator
User avatar

Joined: Fri Mar 02, 2007 11:55 pm
Posts: 2304
Location: S.W. Pa. Wellsville Water Cooled Chapter
I build everything suspension including front arms and spindles, wheel adapters, beams, torsion eliminators and rear trailing arms. If you need something that is not listed, all it takes is a phone call. 724-650-0816

Front combo neutral spindles $500
3" drop combo spindles $550
Image

2.5 X 1 front trailing arms set up for either torsion springs ($450) or as a suspension shock arm. ($400)
4 X 1 front trailing arms for suspension shocks, double shear shock mounts. $500
BOTH USE THE "KING KONG" (7/8") LINK PINS
Image

2 1/2 X 2 1/2 and 3X3 trailing arms with the "new" style bearing housings $450
Please note; I no longer offer or build a 2 x 3 trailing arm. Instead it has been changed to a 2 1/2" X 2 1/2"
Image

Torsion Eliminators with heims $250
Image

Front beams, heavy wall with shock towers, stock width, +2", +4", +6" starts at $300
NOT SET UP FOR TORSION SPRINGS
Image

Prices and availability subject to change.

_________________
Of all the things I've lost, I miss my mind the most.
M
A
G
A


Last edited by MadMike on Sat Jun 13, 2015 2:16 pm, edited 6 times in total.

Top
 Profile  
 
PostPosted: Sun Sep 08, 2013 12:43 pm 
Offline
User avatar

Joined: Thu Jan 26, 2012 7:32 am
Posts: 815
Location: Tcounty Ohio
Could I use the brake rotors that are on my stock spindles? On your combos.... Don't think so but figured I would ask :)
Thanks


Posted using the WoodsBuggy Mobile App


Top
 Profile  
 
PostPosted: Sun Sep 08, 2013 2:18 pm 
Offline

Joined: Tue Dec 25, 2012 2:22 am
Posts: 335
Location: monroe indiana
If they are kingpin rotors they will fit. Need bearings. 2 sets of combo spindles with stock hubs sitting here now have to be kingpin


Top
 Profile  
 
PostPosted: Sun Sep 08, 2013 2:33 pm 
Offline
User avatar

Joined: Thu Jan 26, 2012 7:32 am
Posts: 815
Location: Tcounty Ohio
I have the Empi KP rotors 4 bolt, like these....
Attachment:
ImageUploadedByWoodsBuggy1378665183.288677.jpg
ImageUploadedByWoodsBuggy1378665183.288677.jpg [ 47.71 KiB | Viewed 21160 times ]



Posted using the WoodsBuggy Mobile App


Top
 Profile  
 
PostPosted: Sun Sep 08, 2013 2:37 pm 
Offline
User avatar

Joined: Mon Jan 10, 2011 12:52 pm
Posts: 917
Location: Calera, Alabama
Man that's some nice lookin stuff

_________________
IF YA CAN'T RUN WITH IT....RUN FROM IT


Top
 Profile  
 
PostPosted: Sun Sep 08, 2013 3:04 pm 
Offline
WB Contributor
User avatar

Joined: Thu Jul 31, 2008 8:26 pm
Posts: 1125
Location: Gadsden TN
Nice work Mike ! I have started a secret fund for some parts :twisted:

Posted using the WoodsBuggy Mobile App


Top
 Profile  
 
PostPosted: Sun Sep 08, 2013 3:42 pm 
Offline

Joined: Tue Dec 25, 2012 2:22 am
Posts: 335
Location: monroe indiana
Mike will know more about brakes and what not . ( since he built the stuff) all I know is kinpin rotors will fit on combo spindles. And yes very great products. Mike knows what he is doin


Top
 Profile  
 
PostPosted: Sun Sep 08, 2013 7:54 pm 
Offline
WoodsBuggy Addict
User avatar

Joined: Fri Nov 14, 2008 9:45 pm
Posts: 2226
Location: Boone County West (BY GOD) Virginia
I've got a set of 2x3 and 3x3 arms and they look awesome! Can't wait to get them on and running. Anytime you can get something that's been brad tested and holds up you know it's gotta be tough. Thanks mike. Chad :mrgreen:

_________________
NOW GAS IT!!!!!


Top
 Profile  
 
PostPosted: Sun Sep 08, 2013 9:04 pm 
Offline
WoodsBuggy Addict
User avatar

Joined: Fri Nov 30, 2007 4:03 pm
Posts: 3181
Location: leeds alabama
how much on a beam

_________________
Image

I DO NOT FREE BASE COCAINE


Top
 Profile  
 
PostPosted: Sun Sep 08, 2013 10:51 pm 
Offline
Master fabricator
User avatar

Joined: Fri Mar 02, 2007 11:55 pm
Posts: 2304
Location: S.W. Pa. Wellsville Water Cooled Chapter
Psycho Alpha wrote:
I have the Empi KP rotors 4 bolt, like these....
Attachment:
ImageUploadedByWoodsBuggy1378665183.288677.jpg



Posted using the WoodsBuggy Mobile App


That should bolt right up to them, and if they don't, I'll make them fit. :wink:

jesse wrote:
how much on a beam

I'll know more in a day or two, I'm pricing out material.

_________________
Of all the things I've lost, I miss my mind the most.
M
A
G
A


Top
 Profile  
 
PostPosted: Sun Sep 08, 2013 11:33 pm 
Offline
WoodsBuggy Addict
User avatar

Joined: Fri Nov 30, 2007 4:03 pm
Posts: 3181
Location: leeds alabama
ok cool i would rather buy one off you being it will be stronger and i like the choices you have in width

_________________
Image

I DO NOT FREE BASE COCAINE


Top
 Profile  
 
PostPosted: Thu Sep 12, 2013 9:59 pm 
Offline
WoodsBuggy Addict
User avatar

Joined: Tue Sep 08, 2009 4:43 pm
Posts: 1847
Location: rittman,ohio ----------- wellsville, water cooled chapter
Nice looking work Mike !

_________________
Theirs no replacement for displacement !


Top
 Profile  
 
PostPosted: Wed Oct 02, 2013 10:49 am 
Offline
Master fabricator
User avatar

Joined: Fri Mar 02, 2007 11:55 pm
Posts: 2304
Location: S.W. Pa. Wellsville Water Cooled Chapter
I have material to build 2", 4", or 6" over heavy wall front beams, with shock towers. No torsion springs, no rack plate. They are built to order.
Image
I also have material to build 2 1/2" X 1" and 4" X1" heavy wall front trailing arms. They are also built to order.
Image

_________________
Of all the things I've lost, I miss my mind the most.
M
A
G
A


Top
 Profile  
 
PostPosted: Wed Oct 02, 2013 12:42 pm 
Offline

Joined: Sun Oct 02, 2011 5:32 pm
Posts: 44
How much for the 6 inch wider beam, trailing arms, and combo spindles? Will your arms work with springs or thru rods?


Top
 Profile  
 
PostPosted: Wed Oct 02, 2013 12:58 pm 
Offline
Master fabricator
User avatar

Joined: Fri Mar 02, 2007 11:55 pm
Posts: 2304
Location: S.W. Pa. Wellsville Water Cooled Chapter
Give me a call, be glad to discuss it with you.
724-650-0816

_________________
Of all the things I've lost, I miss my mind the most.
M
A
G
A


Top
 Profile  
 
PostPosted: Thu Oct 24, 2013 3:33 pm 
Offline
Master fabricator
User avatar

Joined: Fri Mar 02, 2007 11:55 pm
Posts: 2304
Location: S.W. Pa. Wellsville Water Cooled Chapter
Stumbled on this stuff in cold storage.

RCI 5 point harness, complete, excellent shape, $40 +ship
Image


Duel spring plates, These are sold
Image

26 5/8 long 22mm torsion bars, make offer +ship
Image

1" hex Aluminum steering rods for stock VW, make offer + ship
Image

724-650-0816

_________________
Of all the things I've lost, I miss my mind the most.
M
A
G
A


Last edited by MadMike on Thu Oct 09, 2014 6:11 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Mon Dec 30, 2013 5:07 pm 
Offline
WoodsBuggy Addict
User avatar

Joined: Fri Nov 14, 2008 9:45 pm
Posts: 2226
Location: Boone County West (BY GOD) Virginia
Thought I'd bump this back to the top for some awesome parts.chad :mrgreen:

_________________
NOW GAS IT!!!!!


Top
 Profile  
 
PostPosted: Mon Dec 30, 2013 5:24 pm 
Offline
Master fabricator
User avatar

Joined: Fri Mar 02, 2007 11:55 pm
Posts: 2304
Location: S.W. Pa. Wellsville Water Cooled Chapter
Thanks Gasman.
Everyone check out the New Woodsbuggy store. It's in it's infancy now but there is more to come.

_________________
Of all the things I've lost, I miss my mind the most.
M
A
G
A


Top
 Profile  
 
PostPosted: Mon Dec 30, 2013 9:28 pm 
Offline
User avatar

Joined: Wed Nov 10, 2010 2:33 pm
Posts: 140
Location: Michigan
MadMike wrote:
Thanks Gasman.
Everyone check out the New Woodsbuggy store. It's in it's infancy now but there is more to come.


Nice work! If you'd like I would love to add your products to our site! Send me a PM if interested!

-Shaun

_________________
http://www.alphafabindustries.com

Specializing in EFI systems engineering, design and tuning for the GM Ecotec Platform.


Top
 Profile  
 
PostPosted: Mon Dec 30, 2013 11:28 pm 
Offline
WoodsBuggy Addict
User avatar

Joined: Tue Sep 08, 2009 4:43 pm
Posts: 1847
Location: rittman,ohio ----------- wellsville, water cooled chapter
Nice gesture their !


Posted using the WoodsBuggy Mobile App

_________________
Theirs no replacement for displacement !


Top
 Profile  
 
PostPosted: Thu Jan 02, 2014 11:45 am 
Offline
User avatar

Joined: Mon Dec 27, 2010 4:13 pm
Posts: 960
Location: lockland ohio
Posted using the WoodsBuggy Mobile App
Just ordered me a set torsion eliminators
First time I had talked to Mike he is very polite guy

_________________
get you some


Top
 Profile  
 
PostPosted: Thu Jan 02, 2014 12:53 pm 
Offline
WB Contributor
User avatar

Joined: Thu Sep 06, 2012 2:23 pm
Posts: 1212
Location: Chattanooga Tennessee
He is very knowledgeable and a great guy.


Posted using the WoodsBuggy Mobile App

_________________
Water Cooled Consortium, Chairman of the Build (Former AC purist)


Top
 Profile  
 
PostPosted: Thu Jan 02, 2014 9:24 pm 
Offline
User avatar

Joined: Thu Apr 28, 2011 9:56 am
Posts: 171
Location: Jemison, Alabama
Hey Mike,
I need a set of the wheel adapters. Send me a pm with the your info and I will send you the cash. Thanks

_________________
Run what you brought, and hope you brought enough!!


Top
 Profile  
 
PostPosted: Thu Jan 02, 2014 10:56 pm 
Offline
User avatar

Joined: Mon Dec 27, 2010 4:13 pm
Posts: 960
Location: lockland ohio
I need your address Mike so i can pay you

_________________
get you some


Top
 Profile  
 
PostPosted: Thu Jan 09, 2014 11:20 pm 
Offline

Joined: Mon Aug 10, 2009 7:39 pm
Posts: 11
HOW MUCH FOR 3X3 TRAILING ARMS. DO THEY HAVE BEARINS AND SEALS IN THEM? WHAT THICKNESS IS MATERIAL USED TO MAKE THEM?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 85 posts ]  Go to page 1, 2, 3, 4  Next

Board index » Buy Sell Trade » Parts, Parts & More Parts

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group