WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
Mike's Machine & Fabrication For Sale List http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=7&t=15970 |
Page 1 of 4 |
Author: | Psycho Alpha [ Sun Sep 08, 2013 12:43 pm ] |
Post subject: | Re: Mike's Machine & Fabrication For Sale List |
Could I use the brake rotors that are on my stock spindles? On your combos.... Don't think so but figured I would ask Thanks Posted using the WoodsBuggy Mobile App |
Author: | buggybarn [ Sun Sep 08, 2013 2:18 pm ] |
Post subject: | Re: Mike's Machine & Fabrication For Sale List |
If they are kingpin rotors they will fit. Need bearings. 2 sets of combo spindles with stock hubs sitting here now have to be kingpin |
Author: | Psycho Alpha [ Sun Sep 08, 2013 2:33 pm ] |
Post subject: | Re: Mike's Machine & Fabrication For Sale List |
I have the Empi KP rotors 4 bolt, like these.... Attachment: ImageUploadedByWoodsBuggy1378665183.288677.jpg [ 47.71 KiB | Viewed 21422 times ] Posted using the WoodsBuggy Mobile App |
Author: | NRIbuggys [ Sun Sep 08, 2013 2:37 pm ] |
Post subject: | Re: Mike's Machine & Fabrication For Sale List |
Man that's some nice lookin stuff |
Author: | aboone993 [ Sun Sep 08, 2013 3:04 pm ] |
Post subject: | Re: Mike's Machine & Fabrication For Sale List |
Nice work Mike ! I have started a secret fund for some parts Posted using the WoodsBuggy Mobile App |
Author: | buggybarn [ Sun Sep 08, 2013 3:42 pm ] |
Post subject: | Re: Mike's Machine & Fabrication For Sale List |
Mike will know more about brakes and what not . ( since he built the stuff) all I know is kinpin rotors will fit on combo spindles. And yes very great products. Mike knows what he is doin |
Author: | gasman [ Sun Sep 08, 2013 7:54 pm ] |
Post subject: | Re: Mike's Machine & Fabrication For Sale List |
I've got a set of 2x3 and 3x3 arms and they look awesome! Can't wait to get them on and running. Anytime you can get something that's been brad tested and holds up you know it's gotta be tough. Thanks mike. Chad |
Author: | jesse [ Sun Sep 08, 2013 9:04 pm ] |
Post subject: | Re: Mike's Machine & Fabrication For Sale List |
how much on a beam |
Author: | MadMike [ Sun Sep 08, 2013 10:51 pm ] |
Post subject: | Re: Mike's Machine & Fabrication For Sale List |
Psycho Alpha wrote: I have the Empi KP rotors 4 bolt, like these.... Attachment: ImageUploadedByWoodsBuggy1378665183.288677.jpg Posted using the WoodsBuggy Mobile App That should bolt right up to them, and if they don't, I'll make them fit. jesse wrote: how much on a beam I'll know more in a day or two, I'm pricing out material. |
Author: | jesse [ Sun Sep 08, 2013 11:33 pm ] |
Post subject: | Re: Mike's Machine & Fabrication For Sale List |
ok cool i would rather buy one off you being it will be stronger and i like the choices you have in width |
Author: | giveitagallon [ Thu Sep 12, 2013 9:59 pm ] |
Post subject: | Re: Mike's Machine & Fabrication For Sale List |
Nice looking work Mike ! |
Author: | jkeene0317 [ Wed Oct 02, 2013 12:42 pm ] |
Post subject: | Re: Mike's Machine & Fabrication For Sale List |
How much for the 6 inch wider beam, trailing arms, and combo spindles? Will your arms work with springs or thru rods? |
Author: | MadMike [ Wed Oct 02, 2013 12:58 pm ] |
Post subject: | Re: Mike's Machine & Fabrication For Sale List |
Give me a call, be glad to discuss it with you. 724-650-0816 |
Author: | gasman [ Mon Dec 30, 2013 5:07 pm ] |
Post subject: | Re: Mike's Machine & Fabrication For Sale List |
Thought I'd bump this back to the top for some awesome parts.chad |
Author: | MadMike [ Mon Dec 30, 2013 5:24 pm ] |
Post subject: | Re: Mike's Machine & Fabrication For Sale List |
Thanks Gasman. Everyone check out the New Woodsbuggy store. It's in it's infancy now but there is more to come. |
Author: | Alpha Fab [ Mon Dec 30, 2013 9:28 pm ] |
Post subject: | Re: Mike's Machine & Fabrication For Sale List |
MadMike wrote: Thanks Gasman. Everyone check out the New Woodsbuggy store. It's in it's infancy now but there is more to come. Nice work! If you'd like I would love to add your products to our site! Send me a PM if interested! -Shaun |
Author: | giveitagallon [ Mon Dec 30, 2013 11:28 pm ] |
Post subject: | Re: Mike's Machine & Fabrication For Sale List |
Nice gesture their ! Posted using the WoodsBuggy Mobile App |
Author: | darrell [ Thu Jan 02, 2014 11:45 am ] |
Post subject: | Re: Mike's Machine & Fabrication For Sale List |
Posted using the WoodsBuggy Mobile App Just ordered me a set torsion eliminators First time I had talked to Mike he is very polite guy |
Author: | Red Barron [ Thu Jan 02, 2014 12:53 pm ] |
Post subject: | Re: Mike's Machine & Fabrication For Sale List |
He is very knowledgeable and a great guy. Posted using the WoodsBuggy Mobile App |
Author: | Wanted_Fugitive [ Thu Jan 02, 2014 9:24 pm ] |
Post subject: | Re: Mike's Machine & Fabrication For Sale List |
Hey Mike, I need a set of the wheel adapters. Send me a pm with the your info and I will send you the cash. Thanks |
Author: | darrell [ Thu Jan 02, 2014 10:56 pm ] |
Post subject: | Re: Mike's Machine & Fabrication For Sale List |
I need your address Mike so i can pay you |
Author: | stephen11 [ Thu Jan 09, 2014 11:20 pm ] |
Post subject: | Re: Mike's Machine & Fabrication For Sale List |
HOW MUCH FOR 3X3 TRAILING ARMS. DO THEY HAVE BEARINS AND SEALS IN THEM? WHAT THICKNESS IS MATERIAL USED TO MAKE THEM? |
Page 1 of 4 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |